Admin

Alcatel PIXI 4 (6) 3G 8050D

8050D


Supported operations


Drivers


Connection

  • All drivers should be installed before connection.
  • You dont need to perform connect and disconnect operation every time you make an operation with handset. Connection should be done once before doing any operations with handset. After all operations with hansdset are complete, disconnect.
  • The phone battery should be charged on 40 percent or more before performing any operation on it! In case battery uncharges during work process, the phone wont switch on and charge battery. In this case you will have to disassemble the phone, take out internal battery and charge it with external charger.
  • Use usb ports placed on the backside of PC to connect to the phone
  • Do not connect or disconnect other USB cables into the PC during performing operation with the phone
  • Dont use USB HUBs, long or very thin USB cables.
  • In case 'Read flash failed' or 'Write flash failed' error appears in the log, try to change the PC or reinstall drivers

Connection Cable: micro usb

To connect to the handset do the following steps:

  1. Go to 'direct services' Tab
  2. Choose your handset model in the combobox at the upper left side of the window
  3. If the phone is connected to the pc - disconnect it.
  4. Switch off the phone
  5. Push Connect button in the application form
  6. Connect cable to the phone. The battery should be charged

To disconnect the handset do the following steps:

  1. Click on 'Disconnect' button
  2. Disconnect the cable from the handset.
Never unplug cable until ongoing operations are finished. This can lead to bricking your phone.


Get Info

If you need to print the information about connected phone once more, you can click on Get Info button. This operation is read only and doesnt change anything inside of the phone.
The following information is printed:
  • Imei numbers
  • Provider Id
  • Simlock information
  • Frp information
  • Firmware version
  • Android version
  • Firmware compilation date time


Unlock

Before changing any data in the handset flash memory, EasyBox Mtk dumps all security partitions into the file in the 'backups' folder. You always can restore lock data by flashing the security backup file back to the handset.

To unlock the handset do the following steps:

  1. Connect to the phone
  2. Click on the Unlock button
  3. Wait until 'Phone successfully unlocked' appears in the log
  4. Disconnect the phone


Flash firmware

Supported provider ids

2AALAE1 2AALAP1 2AALAP1-6 2AALAV1 2AALAV1-1 2AALAZ4 2AALAZ4-1 2AALBD1 2AALBD1-1 2AALBD4 2AALBY1 2AALBY1-4 2AALBY1-41 2AALBY1-42 2AALBY1-43 2AALBY4 2AALDZ1 2AALE11 2AALE11-1 2AALE11-2 2AALE14 2AALE31 2AALE34 2AALGB1 2AALGB1-1 2AALGB1-2 2AALGB1-3 2AALGB4 2AALID4 2AALIE1 2AALIE1-1 2AALIE1-2 2AALIE1-S5 2AALIE4 2AALIN1 2AALMY1 2AALRU1 2AALRU1-1 2AALRU1-1B1 2AALRU1-2 2AALRU4 2AALTH1 2AALTM1 2AALTM4 2AALUA4 2AALWE1 2AALWE1-1 2AALWE1-2 2AALWE4 2AALWE4-1 2BALAE1 2BALAP1 2BALAV1 2BALAV1-B 2BALAZ4 2BALAZ4-1 2BALBD1 2BALBD1-1 2BALBD4 2BALBY1 2BALBY1-4 2BALDZ1 2BALE11 2BALE11-1 2BALE14 2BALE31 2BALE34 2BALGB1 2BALGB1-1 2BALGB1-2 2BALID4 2BALIE1 2BALIE1-S5 2BALIN1 2BALMM4 2BALMY1 2BALRU1 2BALRU1-1 2BALRU1-2 2BALRU4 2BALTH1 2BALTM1 2BALUA4 2BALWE1 2BALWE1-1 2BALWE1-2 2BALWE4 2BALWE4-1 2CALAE1 2CALAP1 2CALAV1 2CALAZ4 2CALAZ4-1 2CALBD1 2CALBD4 2CALBD4-1 2CALBY1 2CALBY1-4 2CALBY4 2CALDZ1 2CALE11 2CALE11-1 2CALE14 2CALE31 2CALGB1 2CALGB1-1 2CALGB1-P 2CALID4 2CALIE1 2CALIN1 2CALMY1 2CALRU1 2CALRU1-1 2CALRU1-2 2CALRU1-S40 2CALRU4 2CALTH1 2CALTM1 2CALWE1 2CALWE1-5 2CALWE4 2CALWE4-1 2DALAE1 2DALAP1 2DALAV1 2DALAZ4 2DALBD1 2DALBD4 2DALBY1 2DALDZ1 2DALE11 2DALE11-1 2DALE14 2DALE31 2DALGB1 2DALID4 2DALIE1 2DALIN1 2DALMY1 2DALRU1 2DALRU1-1 2DALRU4 2DALTH1 2DALTM1 2DALWE1 2DALWE4 2DALWE4-1 2EALAVL 2EALAVL-3 2EALE1L 2EALGBL 2EALWEL 2EALWEL-1 2FALAVL 2FALGBL 2FALWEL 2GALE1L 2GALGBL 2GALWEL 2GALWEL-1 2JALE1L 2JALFRK 2JALWEL

You can find your phone Provider Id in logs during connection or 'get info' operation.
Example: 8050D-2AALAE1
Also you can find the CU on the back side of the handset above imei numbers.

  • Flash firmware process erases FRP and USERDATA partitions. All user data will be lost. Please save all important data from the phones internal memory to safe place before doing flash firmware.
  • You can flash firmware for different providers but this can lead to bricking your phone. You can always return to the original firmware.

To flash firmware on the handset do the following steps:

  1. Download firmware from download area
  2. Connect to the phone
  3. Click on the ... button under the Flash tag
  4. Select *.sbf file in the firmware folder
    5. If you have a scatter firmware, change extention filter in the Open Firmware Dialog to "*sca" and select scatter file. We dont provide firmware in scatter format but you can find it in the internet.
  5. Click on the 'Firmware' button in the 'Flash' section
  6. Wait untill firmware download process finishes
  7. Disconnect the phone
  8. Switch on the phone and wait until it bootes. The boot process after firmware download can last up to 40 minutes. Please be patient


Repair Imei

  • This operation is paid. It costs 10 credits.
  • The operation of changing imei changes all imei numbers at once. Please be careful.
  • Flashing new firmware restores the original imei.
  • You dont need to root the handset or flash twrp or other recoveries. EasyBox Mtk doesnt need root or other things to change imei numbers. It works directly with handset flash device.
  • Internet connection is required to perform imei changing operation.
  • EasyBox Mtk prints the original imei numbers, than new imei numbers if they were already changed.
  • If you need to restore the original imei, you need to flash firmware. It will automatically restore default imeis
You can check imei numbers by typing *#06# in the dialing window of the handset.

To change imei numbers do the following steps

  1. Connect to the phone
  2. Change all imei numbers to the values you want at the right bottom side of the window
  3. Press "Repair IMEI" button
  4. Wait until 'IMEI successfully repaired' appears in the log
  5. Disconnect the phone
  6. Switch on the handset and check new imei numbers.


Factory Reset

To make factory reset do the following steps

  1. Connect to the phone
  2. Press 'Factory reset' button
  3. Disconnect the phone
  4. Switch on the handest and wait until initializing process is finished


Reset FRP

To reset FRP do the following steps
  1. Connect to the phone
  2. Press 'Reset frp' button
  3. Wait until 'FRP Resetting complete' appears in the log
  4. Disconnect the phone


Dump security

Dump security operation is helpful when you want to backup security data before unlocking the phone

To dump security area do the following steps
  1. Connect to the phone
  2. Press 'Dump security' button and select the name for the file to save
  3. Wait until 'Dump security success' appears in the log
  4. Disconnect the phone


Flash security

Flash security operation can be helpful when you want to restore simlock of the unlocked handset

To flash security area do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with security backup
  4. Press "Security" button in the 'Flash' section
  5. Wait until 'Flashing security success' appears in the log
  6. Disconnect the phone


Repair provider id

You need to repair provider id if you reflash the handset to the firmware of the relevant model. For example 5060D to 5060K

Before changing any data in the handset flash memory, EasyBox Mtk dumps all product info partition into the file in the 'backups' folder. You always can restore provider id by flashing this backup file back to the handset.

To repair provider id do the following steps

  1. Connect to the phone
  2. Change probider id value to the value you want at the right bottom side of the window
  3. Press "Repair Provider id" button
  4. Wait until 'IMEI successfully repaired' appears in the log
  5. Disconnect the phone


Flash product info

You can flash product info back to restore original Provider Id

To flash product info do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with product info backup
  4. Press "Product info" button in the 'Flash' section
  5. Wait until 'Flashing product info success' appears in the log
  6. Disconnect the phone