Alcatel 1X 2019 5008D
Connection
- All drivers should be installed before connection.
- You dont need to perform connect and disconnect operation every time you make an operation with handset.
Connection should be done once before doing any operations with handset.
After all operations with hansdset are complete, disconnect.
- The phone battery should be charged on 40 percent or more before performing any operation
on it!
In case battery uncharges during work process, the phone wont switch on and charge battery.
In this case you will have to disassemble the phone, take out internal battery and charge it with
external charger.
-
Use usb ports placed on the backside of PC to connect to the phone
-
Do not connect or disconnect other USB cables into the PC during performing operation with the phone
-
Dont use USB HUBs, long or very thin USB cables.
- In case 'Read flash failed' or 'Write flash failed' error appears in the log, try to change the PC or
reinstall drivers
Connection Cable: micro usb
To connect to the handset do the following steps:
- Go to 'direct services' Tab
- Choose your handset model in the combobox at the upper left side of the window
- If the phone is connected to the pc - disconnect it.
- Switch off the phone
- Push Connect button in the application form
- Connect cable to the phone. The battery should be charged
To disconnect the handset do the following steps:
- Click on 'Disconnect' button
- Disconnect the cable from the handset.
Never unplug cable until ongoing operations are finished. This can lead to bricking your phone.
Get Info
If you need to print the information about connected phone once more, you can click on
Get Info button.
This operation is read only and doesnt change anything inside of the phone.
The following information is printed:
- Imei numbers
- Provider Id
- Simlock information
- Frp information
- Firmware version
- Android version
- Firmware compilation date time
Unlock
Before changing any data in the handset flash memory, EasyBox Mtk dumps all security partitions into the file
in the 'backups' folder. You always can restore lock data by
flashing the security backup file back to the handset.
To unlock the handset do the following steps:
- Connect to the phone
- Click on the Unlock button
- Wait until 'Phone successfully unlocked' appears in the log
- Disconnect the phone
Flash firmware
Supported provider ids
2A1UFRE
2AALE12
2AALE22
2AALFRK
2AALMY2
2AALWE2
2ADHHU2
2AODPC2
2ATBAT2
2ATBCZ2
2ATBGR2
2ATBHR2
2ATBHU2
2ATBME1
2ATBMK1
2ATBPL2
2ATBSK2
2ATIIT2
2AVDES2
2AVDIE1
2AVDMK2
2AVDPT1
2AVDPT1-1P
2AVDPT1-2
2AVDPT1-PS40
2AVDPTJ
2AVDRO2
2AVNRS2
2AWNIT2
2B1UFRE
2BALE12
2BALE22
2BALFRK
2BALMY2
2BALWE2
2BDHHU2
2BODPC2
2BTBAT2
2BTBCZ2
2BTBGR2
2BTBHR2
2BTBHU2
2BTBME1
2BTBMK1
2BTBPL2
2BTBSK2
2BTIIT2
2BVDES2
2BVDIE1
2BVDMK2
2BVDPT1
2BVDPT1-S40
2BVDPTJ
2BVDRO2
2BVNRS2
2BWNIT2
2D1UFRE
2DALE12
2DALE22
2DALFRK
2DALMY2
2DALWE2
2DDHHU2
2DODPC2
2DTBAT2
2DTBCZ2
2DTBGR2
2DTBHR2
2DTBHU2
2DTBME1
2DTBMK1
2DTBPL2
2DTBSK2
2DTIIT2
2DVDES2
2DVDIE1
2DVDMK2
2DVDPT1
2DVDPT1-S40
2DVDPTJ
2DVDRO2
2DVNRS2
2DWNIT2
2atbpl2
You can find your phone Provider Id in logs during connection or 'get info' operation.
Example: 5008D-2A1UFRE
Also you can find the CU
on the back side of the handset
above imei numbers.
-
Flash firmware process erases FRP and USERDATA partitions. All user data will be lost.
Please save all important data from the phones internal memory to safe place before doing
flash firmware.
-
You can flash firmware for different providers but this can lead to bricking your phone.
You can always return to the original firmware.
To flash firmware on the handset do the following steps:
- Download firmware from download area
- Connect to the phone
- Click on the ... button under the Flash tag
- Select *.sbf file in the firmware folder
If you have a scatter firmware, change extention filter in the Open Firmware Dialog to "*sca"
and select scatter file. We dont provide firmware in scatter format but you can find it in the internet.
- Click on the 'Firmware' button in the 'Flash' section
- Wait untill firmware download process finishes
- Disconnect the phone
- Switch on the phone and wait until it bootes. The boot process after firmware download can last up to 40
minutes. Please be patient
Repair Imei
- This operation is paid. It costs 10 credits.
- The operation of changing imei changes all imei numbers at once. Please be careful.
- Flashing new firmware restores the original imei.
- You dont need to root the handset or flash twrp or other recoveries.
EasyBox Mtk doesnt need root or other things to change imei numbers.
It works directly with handset flash device.
- Internet connection is required to perform imei changing operation.
- EasyBox Mtk prints the original imei numbers, than new imei numbers if they were already changed.
- If you need to restore the original imei, you need to flash firmware. It will
automatically restore default imeis
You can check imei numbers by typing *#06# in the dialing window of the handset.
To change imei numbers do the following steps
- Connect to the phone
- Change all imei numbers to the values you want at the right bottom side of the window
- Press "Repair IMEI" button
- Wait until 'IMEI successfully repaired' appears in the log
- Disconnect the phone
- Switch on the handset and check new imei numbers.
Dump security
Dump security operation is helpful when you want to backup security data before
unlocking the phone
To dump security area do the following steps
- Connect to the phone
- Press 'Dump security' button and select the name for the file to save
- Wait until 'Dump security success' appears in the log
- Disconnect the phone
Flash security
Flash security operation can be helpful when you want to restore simlock of the unlocked
handset
To flash security area do the following steps
- Connect to the phone
- Click on the ... button under the Flash tag
- Select *.sbf file with security backup
- Press "Security" button in the 'Flash' section
- Wait until 'Flashing security success' appears in the log
- Disconnect the phone
Repair provider id
You need to repair provider id if you reflash the handset to the firmware of the relevant model. For example
5060D to 5060K
Before changing any data in the handset flash memory, EasyBox Mtk dumps all product info partition into the file
in the 'backups' folder. You always can restore provider id by
flashing this backup file back to the handset.
To repair provider id do the following steps
- Connect to the phone
- Change probider id value to the value you want at the right bottom side of the window
- Press "Repair Provider id" button
- Wait until 'IMEI successfully repaired' appears in the log
- Disconnect the phone
Flash product info
You can flash product info back to restore original Provider Id
To flash product info do the following steps
- Connect to the phone
- Click on the ... button under the Flash tag
- Select *.sbf file with product info backup
- Press "Product info" button in the 'Flash' section
- Wait until 'Flashing product info success' appears in the log
- Disconnect the phone