Admin

Alcatel PIXI 3 (4.5) LTE 5017X

5017X


Supported operations


Drivers


Connection

  • All drivers should be installed before connection.
  • You dont need to perform connect and disconnect operation every time you make an operation with handset. Connection should be done once before doing any operations with handset. After all operations with hansdset are complete, disconnect.
  • The phone battery should be charged on 40 percent or more before performing any operation on it! In case battery uncharges during work process, the phone wont switch on and charge battery. In this case you will have to take out the battery from the phone and charge it with external charger.
  • Use usb ports placed on the backside of PC to connect to the phone
  • Do not connect or disconnect other USB cables into the PC during performing operation with the phone
  • Dont use USB HUBs, long or very thin USB cables.
  • In case 'Read flash failed' or 'Write flash failed' error appears in the log, try to change the PC or reinstall drivers

Connection Cable: micro usb

To connect to the handset do the following steps:

  1. Go to 'direct services' Tab
  2. Choose your handset model in the combobox at the upper left side of the window
  3. Disconnect the handset from the cable.
  4. Remove battery from the handset.
  5. Push Connect button in the application form
  6. Insert battery and connect cable to the phone. The battery should be charged
  7. You should see the 'Phone found. Sending loader' strings in the Log
    8. If the handset began to load(you see the 'Alcatel' logo), the connection with handset failed! Click on 'Cancel', disconnect the pnone, switch it on, than switch it off and repeat 'Connection' procedure once more. If it doesnt help, try relaunching EasyBox Mtk application, install drivers or charge phones battery.

To disconnect the handset do the following steps:

  1. Click on 'Disconnect' button
  2. Disconnect the cable from the handset.
Never unplug cable until ongoing operations are finished. This can lead to bricking your phone.


Get Info

If you need to print the information about connected phone once more, you can click on Get Info button. This operation is read only and doesnt change anything inside of the phone.
The following information is printed:
  • Imei numbers
  • Provider Id
  • Simlock information
  • Frp information
  • Firmware version
  • Android version
  • Firmware compilation date time


Unlock

Before changing any data in the handset flash memory, EasyBox Mtk dumps all security partitions into the file in the 'backups' folder. You always can restore lock data by flashing the security backup file back to the handset.

To unlock the handset do the following steps:

  1. Connect to the phone
  2. Click on the Unlock button
  3. Wait until 'Phone successfully unlocked' appears in the log
  4. Disconnect the phone


Flash firmware

Supported provider ids

2A3EBE1 2AALBE1 2AALDK1 2AALGB1 2AALGB1-1 2AALGB1-2 2AALGB1-3 2AALIB1 2AALIB1-P 2AALIE1 2AALIE1-1 2AALIE1-2 2AALIE1-S5 2AALMA1 2AALSE1 2AALWA1 2AAMMA1 2ABGRU1 2AE8GB1 2AEAFI1 2AGOMT1 2AGOMT1-P 2AMWIE1 2AMWIE1-1 2AOBGB2 2APWGB1 2APWGB1-1 2ARGES3 2ARGES3-1 2ARGES3-P 2ARGES3-PM 2ARGES3-R 2ATBAL1 2ATBHR1 2ATBME1 2ATBMK1 2ATBNL1 2AVDFJ1 2BALBE1 2BALGB1 2BALGB1-1 2BALGB1-2 2BALIB1 2BALIE1 2BALIE1-S5 2BALMA1 2BALSE1 2BALWA1 2BAMMA1 2BBGRU1 2BE8GB1 2BE8GB1-1 2BE8GBK 2BE8GBK-1 2BEAFI1 2BGOMT1 2BMWIE1 2BOBGB2 2BPWGB1 2BRGES3 2BRGES3-1 2BTBAL1 2BTBHR1 2BTBME1 2BTBMK1 2BTBNL1 2BVDFJ1 2CALBE1 2CALGB1 2CALGB1-1 2CALGB1-P 2CALIB1 2CALIE1 2CALMA1 2CALSE1 2CAMMA1 2CBGRU1 2CE8GB1 2CGOMT1 2CMWIE1 2COBGB2 2COBGB2-1 2CPWGB1 2CRGES3 2CRGES3-P 2CTBAL1 2CTBHR1 2CTBME1 2CTBMK1 2CTBNL1 2CVDFJ1 2DALBE1 2DALFI1 2DALGB1 2DALIB1 2DALIE1 2DALMA1 2DALSE1 2DAMMA1 2DBGRU1 2DMWIE1 2DOBGB2 2DPWGB1 2DPWGB1-1 2DRGES3 2DRGES3-R 2DTBAL1 2DTBHR1 2DTBME1 2DTBMK1 2DTBNL1 2DVDFJ1 2EALBE1 2EALGB1 2EALIB1 2EALIE1 2EALMA1 2EALSE1 2EAMMA1 2EBGRU1 2EMWIE1 2EPWGB1 2ERGES3 2ERGES3-PM 2ETBAL1 2ETBHR1 2ETBME1 2ETBMK1 2ETBNL1 2EVDFJ1 2FALBE1 2FALGB1 2FALIB1 2FALIE1 2FALMA1 2FALSE1 2FAMMA1 2FBGRU1 2FOBGB2 2FPWGB1 2FRGES3 2FTBAL1 2FTBHR1 2FTBME1 2FTBMK1 2FTBNL1 2FVDFJ1

You can find your phone Provider Id in logs during connection or 'get info' operation.
Example: 5017X-2A3EBE1
Also you can find the CU under the battery above imei numbers.

  • Flash firmware process erases FRP and USERDATA partitions. All user data will be lost. Please save all important data from the phones internal memory to safe place before doing flash firmware.
  • You can flash firmware for different providers but this can lead to bricking your phone. You can always return to the original firmware.

To flash firmware on the handset do the following steps:

  1. Download firmware from download area
  2. Connect to the phone
  3. Click on the ... button under the Flash tag
  4. Select *.sbf file in the firmware folder
    5. If you have a scatter firmware, change extention filter in the Open Firmware Dialog to "*sca" and select scatter file. We dont provide firmware in scatter format but you can find it in the internet.
  5. Click on the 'Firmware' button in the 'Flash' section
  6. Wait untill firmware download process finishes
  7. Disconnect the phone
  8. Switch on the phone and wait until it bootes. The boot process after firmware download can last up to 40 minutes. Please be patient


Repair Imei

  • This operation is paid. It costs 10 credits.
  • The operation of changing imei changes all imei numbers at once. Please be careful.
  • Flashing new firmware restores the original imei.
  • You dont need to root the handset or flash twrp or other recoveries. EasyBox Mtk doesnt need root or other things to change imei numbers. It works directly with handset flash device.
  • Internet connection is required to perform imei changing operation.
  • EasyBox Mtk prints the original imei numbers, than new imei numbers if they were already changed.
  • If you need to restore the original imei, you need to flash firmware. It will automatically restore default imeis
You can check imei numbers by typing *#06# in the dialing window of the handset.

To change imei numbers do the following steps

  1. Connect to the phone
  2. Change all imei numbers to the values you want at the right bottom side of the window
  3. Press "Repair IMEI" button
  4. Wait until 'IMEI successfully repaired' appears in the log
  5. Disconnect the phone
  6. Switch on the handset and check new imei numbers.


Factory Reset

To make factory reset do the following steps

  1. Connect to the phone
  2. Press 'Factory reset' button
  3. Disconnect the phone
  4. Switch on the handest and wait until initializing process is finished


Reset FRP

To reset FRP do the following steps
  1. Connect to the phone
  2. Press 'Reset frp' button
  3. Wait until 'FRP Resetting complete' appears in the log
  4. Disconnect the phone


Dump security

Dump security operation is helpful when you want to backup security data before unlocking the phone

To dump security area do the following steps
  1. Connect to the phone
  2. Press 'Dump security' button and select the name for the file to save
  3. Wait until 'Dump security success' appears in the log
  4. Disconnect the phone


Flash security

Flash security operation can be helpful when you want to restore simlock of the unlocked handset

To flash security area do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with security backup
  4. Press "Security" button in the 'Flash' section
  5. Wait until 'Flashing security success' appears in the log
  6. Disconnect the phone


Repair provider id

You need to repair provider id if you reflash the handset to the firmware of the relevant model. For example 5060D to 5060K

Before changing any data in the handset flash memory, EasyBox Mtk dumps all product info partition into the file in the 'backups' folder. You always can restore provider id by flashing this backup file back to the handset.

To repair provider id do the following steps

  1. Connect to the phone
  2. Change probider id value to the value you want at the right bottom side of the window
  3. Press "Repair Provider id" button
  4. Wait until 'IMEI successfully repaired' appears in the log
  5. Disconnect the phone


Flash product info

You can flash product info back to restore original Provider Id

To flash product info do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with product info backup
  4. Press "Product info" button in the 'Flash' section
  5. Wait until 'Flashing product info success' appears in the log
  6. Disconnect the phone