Alcatel PIXI 4 (4) 4034D

4034D


Supported operations


Drivers


Connection

  • All drivers should be installed before connection.
  • You dont need to perform connect and disconnect operation every time you make an operation with handset. Connection should be done once before doing any operations with handset. After all operations with hansdset are complete, disconnect.
  • The phone battery should be charged on 40 percent or more before performing any operation on it! In case battery uncharges during work process, the phone wont switch on and charge battery. In this case you will have to take out the battery from the phone and charge it with external charger.
  • Use usb ports placed on the backside of PC to connect to the phone
  • Do not connect or disconnect other USB cables into the PC during performing operation with the phone
  • Dont use USB HUBs, long or very thin USB cables.
  • In case 'Read flash failed' or 'Write flash failed' error appears in the log, try to change the PC or reinstall drivers

Connection Cable: micro usb

To connect to the handset do the following steps:

  1. Go to 'direct services' Tab
  2. Choose your handset model in the combobox at the upper left side of the window
  3. Disconnect the handset from the cable.
  4. Remove battery from the handset.
  5. Push Connect button in the application form
  6. Insert battery and connect cable to the phone. The battery should be charged
  7. You should see the 'Phone found. Sending loader' strings in the Log
  8. If the handset began to load(you see the 'Alcatel' logo), the connection with handset failed! Click on 'Cancel', disconnect the pnone, switch it on, than switch it off and repeat 'Connection' procedure once more. If it doesnt help, try relaunching EasyBox Mtk application, install drivers or charge phones battery.

To disconnect the handset do the following steps:

  1. Click on 'Disconnect' button
  2. Disconnect the cable from the handset.
Never unplug cable until ongoing operations are finished. This can lead to bricking your phone.


Get Info

If you need to print the information about connected phone once more, you can click on Get Info button. This operation is read only and doesnt change anything inside of the phone.
The following information is printed:
  • Imei numbers
  • Provider Id
  • Simlock information
  • Frp information
  • Firmware version
  • Android version
  • Firmware compilation date time


Unlock

Before changing any data in the handset flash memory, EasyBox Mtk dumps all security partitions into the file in the 'backups' folder. You always can restore lock data by flashing the security backup file back to the handset.

To unlock the handset do the following steps:

  1. Connect to the phone
  2. Click on the Unlock button
  3. Wait until 'Phone successfully unlocked' appears in the log
  4. Disconnect the phone


Flash firmware

Supported provider ids

2AALAP1 2AALAP1-6 2AALAZ1 2AALAZ1-1 2AALBD1 2AALBD1-1 2AALE11 2AALE11-1 2AALE11-2 2AALE31 2AALEG1 2AALFR1 2AALFR1-1 2AALFR1-15 2AALGB1 2AALGB1-1 2AALGB1-2 2AALGB1-3 2AALGE1 2AALIE1 2AALIE1-1 2AALIE1-2 2AALIE1-S5 2AALIN1 2AALMM1 2AALMY1 2AALND1 2AALRU1 2AALRU1-1 2AALRU1-1B1 2AALRU1-2 2AALTM1 2AALUA1 2AALWA1 2AALWE1 2AALWE1-1 2AALWE1-2 2ABGKZ1 2ABYFR1 2ABYFR1-5R 2AMSAM1 2ARGPL1 2ARGRO1 2ATMCV1 2AVNRS1 2BALAP1 2BALAZ1 2BALAZ1-1 2BALBD1 2BALBD1-1 2BALE11 2BALE11-1 2BALE31 2BALEG1 2BALFR1 2BALFR1-1 2BALFR1-P 2BALGB1 2BALGB1-1 2BALGB1-2 2BALGE1 2BALIE1 2BALIE1-S5 2BALIN1 2BALMM1 2BALMY1 2BALND1 2BALRU1 2BALRU1-1 2BALRU1-2 2BALRUA 2BALTM1 2BALUA1 2BALWA1 2BALWE1 2BALWE1-1 2BALWE1-2 2BBGKZ1 2BBYFR1 2BMSAM1 2BRGPL1 2BRGPL1-P 2BRGRO1 2BTMCV1 2BVNRS1 2CALAP1 2CALAZ1 2CALAZ1-1 2CALBD1 2CALE11 2CALE11-1 2CALE31 2CALEG1 2CALFR1 2CALFR1-1 2CALFR1-2S50 2CALGB1 2CALGB1-1 2CALGB1-P 2CALGE1 2CALIE1 2CALIN1 2CALMM1 2CALMY1 2CALND1 2CALRU1 2CALRU1-1 2CALRU1-S40 2CALTM1 2CALUA1 2CALWE1 2CALWE1-5 2CBGKZ1 2CBYFR1 2CC6CV1 2CMSAM1 2CRGPL1 2CRGRO1 2CTMCV1 2CVNRS1 2DALAP1 2DALAZ1 2DALAZ1-1 2DALBD1 2DALE11 2DALE11-1 2DALE31 2DALEG1 2DALFR1 2DALFR1-1 2DALFR1-P 2DALGB1 2DALGE1 2DALIE1 2DALIN1 2DALMM1 2DALMY1 2DALND1 2DALRU1 2DALRU1-1 2DALTM1 2DALUA1 2DALWE1 2DBGKZ1 2DBYFR1 2DC6CV1 2DMSAM1 2DRGPL1 2DRGRO1 2DTMCV1 2DVNRS1 2EALAP1 2EALAZ1 2EALAZ1-1 2EALBD1 2EALE11 2EALE11-1 2EALEG1 2EALFR1 2EALFR1-1 2EALFR1-P 2EALGB1 2EALGE1 2EALIE1 2EALIN1 2EALMM1 2EALMY1 2EALRU1 2EALRU1-1 2EALRU1-2 2EALTM1 2EALUA1 2EALUA1-1 2EALWE1 2EBGKZ1 2EBYFR1 2EC6CV1 2EMSAM1 2ERGPL1 2ERGRO1 2ETMCV1 2EVNRS1 2GALAP1 2GALAZ1 2GALAZ1-1 2GALBD1 2GALE11 2GALE31 2GALEG1 2GALFR1 2GALFR1-1 2GALGB1 2GALGE1 2GALIE1 2GALIN1 2GALRU1 2GALUA1 2GALWE1 2GBGKZ1 2GBYFR1 2GC6CV1 2GMSAM1 2GRGPL1 2GRGRO1 2GRGRO1-M 2GTMCV1 2GVNRS1 2HRGPL1 2HRGRO1 2JALAP1 2JALAZ1 2JALAZ1-1 2JALBD1 2JALE11 2JALE31 2JALEG1 2JALFR1 2JALFR1-P 2JALGB1 2JALGE1 2JALIE1 2JALND1 2JALRU1 2JALUA1 2JALWE1 2JALWE1-4 2JBGKZ1 2JBYFR1 2JMSAM1 2JRGPL1 2JRGRO1 2JRGRO1-M 2JTMCV1 2JVNRS1 2argpl1 2crgpl1 2drgpl1

You can find your phone Provider Id in logs during connection or 'get info' operation.
Example: 4034D-2AALAP1
Also you can find the CU under the battery above imei numbers.

  • Flash firmware process erases FRP and USERDATA partitions. All user data will be lost. Please save all important data from the phones internal memory to safe place before doing flash firmware.
  • You can flash firmware for different providers but this can lead to bricking your phone. You can always return to the original firmware.

To flash firmware on the handset do the following steps:

  1. Download firmware from download area
  2. Connect to the phone
  3. Click on the ... button under the Flash tag
  4. Select *.sbf file in the firmware folder
  5. If you have a scatter firmware, change extention filter in the Open Firmware Dialog to "*sca" and select scatter file. We dont provide firmware in scatter format but you can find it in the internet.
  6. Click on the 'Firmware' button in the 'Flash' section
  7. Wait untill firmware download process finishes
  8. Disconnect the phone
  9. Switch on the phone and wait until it bootes. The boot process after firmware download can last up to 40 minutes. Please be patient


Repair Imei

  • This operation is paid. It costs 10 credits.
  • The operation of changing imei changes all imei numbers at once. Please be careful.
  • Flashing new firmware restores the original imei.
  • You dont need to root the handset or flash twrp or other recoveries. EasyBox Mtk doesnt need root or other things to change imei numbers. It works directly with handset flash device.
  • Internet connection is required to perform imei changing operation.
  • EasyBox Mtk prints the original imei numbers, than new imei numbers if they were already changed.
  • If you need to restore the original imei, you need to flash firmware. It will automatically restore default imeis
You can check imei numbers by typing *#06# in the dialing window of the handset.

To change imei numbers do the following steps

  1. Connect to the phone
  2. Change all imei numbers to the values you want at the right bottom side of the window
  3. Press "Repair IMEI" button
  4. Wait until 'IMEI successfully repaired' appears in the log
  5. Disconnect the phone
  6. Switch on the handset and check new imei numbers.


Factory Reset

To make factory reset do the following steps

  1. Connect to the phone
  2. Press 'Factory reset' button
  3. Disconnect the phone
  4. Switch on the handest and wait until initializing process is finished


Reset FRP

To reset FRP do the following steps
  1. Connect to the phone
  2. Press 'Reset frp' button
  3. Wait until 'FRP Resetting complete' appears in the log
  4. Disconnect the phone


Dump security

Dump security operation is helpful when you want to backup security data before unlocking the phone

To dump security area do the following steps
  1. Connect to the phone
  2. Press 'Dump security' button and select the name for the file to save
  3. Wait until 'Dump security success' appears in the log
  4. Disconnect the phone


Flash security

Flash security operation can be helpful when you want to restore simlock of the unlocked handset

To flash security area do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with security backup
  4. Press "Security" button in the 'Flash' section
  5. Wait until 'Flashing security success' appears in the log
  6. Disconnect the phone


Repair provider id

You need to repair provider id if you reflash the handset to the firmware of the relevant model. For example 5060D to 5060K

Before changing any data in the handset flash memory, EasyBox Mtk dumps all product info partition into the file in the 'backups' folder. You always can restore provider id by flashing this backup file back to the handset.

To repair provider id do the following steps

  1. Connect to the phone
  2. Change probider id value to the value you want at the right bottom side of the window
  3. Press "Repair Provider id" button
  4. Wait until 'IMEI successfully repaired' appears in the log
  5. Disconnect the phone


Flash product info

You can flash product info back to restore original Provider Id

To flash product info do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with product info backup
  4. Press "Product info" button in the 'Flash' section
  5. Wait until 'Flashing product info success' appears in the log
  6. Disconnect the phone