Admin

Alcatel PIXI 4 (5) 3G 5010D

5010D


Supported operations


Drivers


Connection

  • All drivers should be installed before connection.
  • You dont need to perform connect and disconnect operation every time you make an operation with handset. Connection should be done once before doing any operations with handset. After all operations with hansdset are complete, disconnect.
  • The phone battery should be charged on 40 percent or more before performing any operation on it! In case battery uncharges during work process, the phone wont switch on and charge battery. In this case you will have to take out the battery from the phone and charge it with external charger.
  • Use usb ports placed on the backside of PC to connect to the phone
  • Do not connect or disconnect other USB cables into the PC during performing operation with the phone
  • Dont use USB HUBs, long or very thin USB cables.
  • In case 'Read flash failed' or 'Write flash failed' error appears in the log, try to change the PC or reinstall drivers

Connection Cable: micro usb

To connect to the handset do the following steps:

  1. Go to 'direct services' Tab
  2. Choose your handset model in the combobox at the upper left side of the window
  3. Disconnect the handset from the cable.
  4. Remove battery from the handset.
  5. Push Connect button in the application form
  6. Insert battery and connect cable to the phone. The battery should be charged
  7. You should see the 'Phone found. Sending loader' strings in the Log
    8. If the handset began to load(you see the 'Alcatel' logo), the connection with handset failed! Click on 'Cancel', disconnect the pnone, switch it on, than switch it off and repeat 'Connection' procedure once more. If it doesnt help, try relaunching EasyBox Mtk application, install drivers or charge phones battery.

To disconnect the handset do the following steps:

  1. Click on 'Disconnect' button
  2. Disconnect the cable from the handset.
Never unplug cable until ongoing operations are finished. This can lead to bricking your phone.


Get Info

If you need to print the information about connected phone once more, you can click on Get Info button. This operation is read only and doesnt change anything inside of the phone.
The following information is printed:
  • Imei numbers
  • Provider Id
  • Simlock information
  • Frp information
  • Firmware version
  • Android version
  • Firmware compilation date time


Unlock

Before changing any data in the handset flash memory, EasyBox Mtk dumps all security partitions into the file in the 'backups' folder. You always can restore lock data by flashing the security backup file back to the handset.

To unlock the handset do the following steps:

  1. Connect to the phone
  2. Click on the Unlock button
  3. Wait until 'Phone successfully unlocked' appears in the log
  4. Disconnect the phone


Flash firmware

Supported provider ids

2AALAZ1 2AALAZ1-1 2AALBD1 2AALBD1-1 2AALBN1 2AALBY1 2AALBY1-4 2AALBY1-41 2AALBY1-42 2AALBY1-43 2AALE11 2AALE11-1 2AALE11-2 2AALE31 2AALFR1 2AALFR1-1 2AALFR1-15 2AALGB1 2AALGB1-1 2AALGB1-2 2AALGB1-3 2AALGE1 2AALID1 2AALIE1 2AALIE1-1 2AALIE1-2 2AALIE1-S5 2AALIN1 2AALMY1 2AALND1 2AALRU1 2AALRU1-1 2AALRU1-1B1 2AALRU1-2 2AALTM1 2AALUA1 2AALWE1 2AALWE1-1 2AALWE1-2 2ANRFR1 2AS7RS1 2ATMCV1 2AVNRS1 2BALAZ1 2BALAZ1-1 2BALBD1 2BALBD1-1 2BALBY1 2BALBY1-4 2BALE11 2BALE11-1 2BALE31 2BALFR1 2BALFR1-1 2BALFR1-P 2BALGB1 2BALGB1-1 2BALGB1-2 2BALGE1 2BALID1 2BALIE1 2BALIE1-S5 2BALIN1 2BALMY1 2BALND1 2BALRU1 2BALRU1-1 2BALRU1-2 2BALTM1 2BALUA1 2BALWE1 2BALWE1-1 2BALWE1-2 2BNRFR1 2BS7RS1 2BS7RS1-1 2BTMCV1 2BVNRS1 2CALAZ1 2CALAZ1-1 2CALBD1 2CALBY1 2CALBY1-4 2CALE11 2CALE11-1 2CALE31 2CALFR1 2CALFR1-1 2CALFR1-2S50 2CALGB1 2CALGB1-1 2CALGB1-P 2CALGE1 2CALID1 2CALIE1 2CALIN1 2CALMY1 2CALND1 2CALRU1 2CALRU1-1 2CALRU1-2 2CALRU1-S40 2CALTM1 2CALUA1 2CALWE1 2CALWE1-5 2CC6CV1 2CNRFR1 2CS7RS1 2CTMCV1 2CVNRS1 2DALAZ1 2DALAZ1-1 2DALBD1 2DALBY1 2DALE11 2DALE11-1 2DALE31 2DALFR1 2DALFR1-1 2DALFR1-P 2DALGB1 2DALGE1 2DALID1 2DALIE1 2DALIN1 2DALMY1 2DALND1 2DALRU1 2DALRU1-1 2DALTM1 2DALUA1 2DALWE1 2DC6CV1 2DNRFR1 2DS7RS1 2DTMCV1 2DVNRS1 2FALAZ1 2FALAZ1-1 2FALBD1 2FALBY1 2FALBY1-4 2FALE11 2FALE11-1 2FALE31 2FALFR1 2FALFR1-1 2FALGB1 2FALGE1 2FALID1 2FALIE1 2FALIN1 2FALMY1 2FALRU1 2FALRU1-1 2FALTM1 2FALUA1 2FALWE1 2FNRFR1 2FS7RS1 2FTMCV1 2FVNRS1 2GALAZ1 2GALAZ1-1 2GALBD1 2GALBY1 2GALE11 2GALE31 2GALFR1 2GALFR1-1 2GALGB1 2GALGE1 2GALIE1 2GALIN1 2GALRU1 2GALUA1 2GALWE1 2GC6CV1 2GNRFR1 2GS7RS1 2GTMCV1 2GVNRS1 2HALAZ1 2HALBD1 2HALBY1 2HALFR1 2HALGB1 2HALGE1 2HALIE1 2HALIN1 2HALRU1 2HALUA1 2HALWE1 2HNRFR1 2HS7RS1 2HTMCV1 2HVNRS1 2JALAZ1 2JALAZ1-1 2JALBD1 2JALBY1 2JALE11 2JALE31 2JALFR1 2JALFR1-P 2JALGB1 2JALGE1 2JALIE1 2JALND1 2JALRU1 2JALUA1 2JALWE1 2JALWE1-4 2JNRFR1 2JS7RS1 2JTMCV1 2JVNRS1 2OALFR1 2TALFR1 2TALGB1 2TALIE1 2TALRU1 2TALUA1 2TVNRS1 2UALFR1 2UALGB1 2UALIE1 2UALRU1 2UALUA1 2UVNRS1 2VALE31 2VALFR1 2VALGB1 2VALIE1 2VALRU1 2VALUA1 2VALWE1 2VVNRS1

You can find your phone Provider Id in logs during connection or 'get info' operation.
Example: 5010D-2AALAZ1
Also you can find the CU under the battery above imei numbers.

  • Flash firmware process erases FRP and USERDATA partitions. All user data will be lost. Please save all important data from the phones internal memory to safe place before doing flash firmware.
  • You can flash firmware for different providers but this can lead to bricking your phone. You can always return to the original firmware.

To flash firmware on the handset do the following steps:

  1. Download firmware from download area
  2. Connect to the phone
  3. Click on the ... button under the Flash tag
  4. Select *.sbf file in the firmware folder
    5. If you have a scatter firmware, change extention filter in the Open Firmware Dialog to "*sca" and select scatter file. We dont provide firmware in scatter format but you can find it in the internet.
  5. Click on the 'Firmware' button in the 'Flash' section
  6. Wait untill firmware download process finishes
  7. Disconnect the phone
  8. Switch on the phone and wait until it bootes. The boot process after firmware download can last up to 40 minutes. Please be patient


Repair Imei

  • This operation is paid. It costs 10 credits.
  • The operation of changing imei changes all imei numbers at once. Please be careful.
  • Flashing new firmware restores the original imei.
  • You dont need to root the handset or flash twrp or other recoveries. EasyBox Mtk doesnt need root or other things to change imei numbers. It works directly with handset flash device.
  • Internet connection is required to perform imei changing operation.
  • EasyBox Mtk prints the original imei numbers, than new imei numbers if they were already changed.
  • If you need to restore the original imei, you need to flash firmware. It will automatically restore default imeis
You can check imei numbers by typing *#06# in the dialing window of the handset.

To change imei numbers do the following steps

  1. Connect to the phone
  2. Change all imei numbers to the values you want at the right bottom side of the window
  3. Press "Repair IMEI" button
  4. Wait until 'IMEI successfully repaired' appears in the log
  5. Disconnect the phone
  6. Switch on the handset and check new imei numbers.


Factory Reset

To make factory reset do the following steps

  1. Connect to the phone
  2. Press 'Factory reset' button
  3. Disconnect the phone
  4. Switch on the handest and wait until initializing process is finished


Reset FRP

To reset FRP do the following steps
  1. Connect to the phone
  2. Press 'Reset frp' button
  3. Wait until 'FRP Resetting complete' appears in the log
  4. Disconnect the phone


Dump security

Dump security operation is helpful when you want to backup security data before unlocking the phone

To dump security area do the following steps
  1. Connect to the phone
  2. Press 'Dump security' button and select the name for the file to save
  3. Wait until 'Dump security success' appears in the log
  4. Disconnect the phone


Flash security

Flash security operation can be helpful when you want to restore simlock of the unlocked handset

To flash security area do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with security backup
  4. Press "Security" button in the 'Flash' section
  5. Wait until 'Flashing security success' appears in the log
  6. Disconnect the phone


Repair provider id

You need to repair provider id if you reflash the handset to the firmware of the relevant model. For example 5060D to 5060K

Before changing any data in the handset flash memory, EasyBox Mtk dumps all product info partition into the file in the 'backups' folder. You always can restore provider id by flashing this backup file back to the handset.

To repair provider id do the following steps

  1. Connect to the phone
  2. Change probider id value to the value you want at the right bottom side of the window
  3. Press "Repair Provider id" button
  4. Wait until 'IMEI successfully repaired' appears in the log
  5. Disconnect the phone


Flash product info

You can flash product info back to restore original Provider Id

To flash product info do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with product info backup
  4. Press "Product info" button in the 'Flash' section
  5. Wait until 'Flashing product info success' appears in the log
  6. Disconnect the phone