Admin

Alcatel 1 5033D

5033D


Supported operations


Drivers


Connection

  • All drivers should be installed before connection.
  • You dont need to perform connect and disconnect operation every time you make an operation with handset. Connection should be done once before doing any operations with handset. After all operations with hansdset are complete, disconnect.
  • The phone battery should be charged on 40 percent or more before performing any operation on it! In case battery uncharges during work process, the phone wont switch on and charge battery. In this case you will have to take out the battery from the phone and charge it with external charger.
  • Use usb ports placed on the backside of PC to connect to the phone
  • Do not connect or disconnect other USB cables into the PC during performing operation with the phone
  • Dont use USB HUBs, long or very thin USB cables.
  • In case 'Read flash failed' or 'Write flash failed' error appears in the log, try to change the PC or reinstall drivers

Connection Cable: micro usb

To connect to the handset do the following steps:

  1. Go to 'direct services' Tab
  2. Choose your handset model in the combobox at the upper left side of the window
  3. Disconnect the handset from the cable.
  4. Remove battery from the handset.
  5. Push Connect button in the application form
  6. Insert battery and connect cable to the phone. The battery should be charged
  7. You should see the 'Phone found. Sending loader' strings in the Log
    8. If the handset began to load(you see the 'Alcatel' logo), the connection with handset failed! Click on 'Cancel', disconnect the pnone, switch it on, than switch it off and repeat 'Connection' procedure once more. If it doesnt help, try relaunching EasyBox Mtk application, install drivers or charge phones battery.

To disconnect the handset do the following steps:

  1. Click on 'Disconnect' button
  2. Disconnect the cable from the handset.
Never unplug cable until ongoing operations are finished. This can lead to bricking your phone.


Get Info

If you need to print the information about connected phone once more, you can click on Get Info button. This operation is read only and doesnt change anything inside of the phone.
The following information is printed:
  • Imei numbers
  • Provider Id
  • Simlock information
  • Frp information
  • Firmware version
  • Android version
  • Firmware compilation date time


Unlock

Before changing any data in the handset flash memory, EasyBox Mtk dumps all security partitions into the file in the 'backups' folder. You always can restore lock data by flashing the security backup file back to the handset.

To unlock the handset do the following steps:

  1. Connect to the phone
  2. Click on the Unlock button
  3. Wait until 'Phone successfully unlocked' appears in the log
  4. Disconnect the phone


Flash firmware

Supported provider ids

2A1UFRE 2A2VVU1 2AALAE1 2AALAM1 2AALAP1 2AALAP1-6 2AALAV1 2AALAV1-1 2AALBD1 2AALBD1-1 2AALE11 2AALE11-1 2AALE11-2 2AALE16 2AALE21 2AALEG1 2AALFRK 2AALKE1 2AALMY1 2AALOM1 2AALRU1 2AALRU1-1 2AALRU1-1B1 2AALRU1-2 2AALWE1 2AALWE1-1 2AALWE1-2 2AALXA1 2ABYFR1 2ABYFR1-5R 2AMPBG1 2AP3PL1 2AP4HI1 2ARGMA1 2ARGWA3 2ARGWB3 2AS7RS1 2ATBGR1 2ATNBG1 2ATNBG1-1 2ATNBG1-2 2ATNRS1 2AVIHI2 2AVVBG1 2B1UFRE 2B2VVU1 2BALAE1 2BALAM1 2BALAP1 2BALAV1 2BALAV1-B 2BALBD1 2BALBD1-1 2BALE11 2BALE11-1 2BALE16 2BALE21 2BALEG1 2BALFRK 2BALKE1 2BALMY1 2BALOM1 2BALRU1 2BALRU1-1 2BALRU1-2 2BALWE1 2BALWE1-1 2BALWE1-2 2BALXA1 2BBYFR1 2BMPBG1 2BP3PL1 2BP4HI1 2BRGMA1 2BRGWA3 2BRGWB3 2BS7RS1 2BS7RS1-1 2BTBGR1 2BTBGR1-S40 2BTNBG1 2BTNRS1 2BVIHI2 2BVVBG1 2C1UFRE 2C2VVU1 2CALAE1 2CALAM1 2CALAP1 2CALAV1 2CALBD1 2CALE11 2CALE11-1 2CALE16 2CALE21 2CALEG1 2CALFRK 2CALKE1 2CALMY1 2CALOM1 2CALRU1 2CALRU1-1 2CALRU1-2 2CALRU1-S40 2CALWE1 2CALWE1-5 2CALXA1 2CBYFR1 2CMPBG1 2CP3PL1 2CP4HI1 2CRGMA1 2CRGWA3 2CRGWB3 2CS7RS1 2CTBGR1 2CTNBG1 2CTNRS1 2CVIHI2 2CVVBG1 2E1UFRE 2E2VVU1 2EALAE1 2EALAM1 2EALAP1 2EALAV1 2EALBD1 2EALE11 2EALE11-1 2EALE16 2EALE21 2EALEG1 2EALFRK 2EALKE1 2EALMY1 2EALOM1 2EALRU1 2EALRU1-1 2EALRU1-2 2EALWE1 2EALXA1 2EBYFR1 2EMPBG1 2EP3PL1 2EP4HI1 2ERGMA1 2ERGTND 2ERGWA3 2ERGWB3 2ES7RS1 2ETBGR1 2ETNBG1 2ETNRS1 2EVIHI2 2EVVBG1 2G1UFRE 2G2VVU1 2GALAE1 2GALAM1 2GALAP1 2GALAV1 2GALBD1 2GALE11 2GALE16 2GALE21 2GALEG1 2GALKE1 2GALMY1 2GALOM1 2GALRU1 2GALWE1 2GALXA1 2GBYFR1 2GMPBG1 2GP3PL1 2GP4HI1 2GRGMA1 2GRGWA3 2GRGWB3 2GS7RS1 2GTBGR1 2GTNBG1 2GTNRS1 2GVIHI2 2GVVBG1 2HALAEA 2HALAMA 2HALAPA 2HALAVA 2HALE1A 2HALE1B 2HALEGA 2HALGEA 2HALHUB 2HALPTA 2HALRUA 2HALUAA 2HALWEA 2HALWEU 2HBYFRB 2HS7RSA 2HTMCVA 2HTNBGB 2HTNHUA 2HTNRSA 2HTRTRA 2HTTTPA 2HVVBGB 2JALAEA 2JALAMA 2JALAPA 2JALAVA 2JALE1A 2JALE1B 2JALEGA 2JALGEA 2JALHUB 2JALPTA 2JALRUA 2JALUAA 2JALWEA 2JALWEU 2JBYFRB 2JS7RSA 2JTMCVA 2JTNBGB 2JTNHUA 2JTNRSA 2JTRTRA 2JTTTPA 2JVVBGB 2ap3PL1 2ap3pl1 2bp3PL1 2bp3pl1 2cp3PL1

You can find your phone Provider Id in logs during connection or 'get info' operation.
Example: 5033D-2A1UFRE
Also you can find the CU under the battery above imei numbers.

  • Flash firmware process erases FRP and USERDATA partitions. All user data will be lost. Please save all important data from the phones internal memory to safe place before doing flash firmware.
  • You can flash firmware for different providers but this can lead to bricking your phone. You can always return to the original firmware.

To flash firmware on the handset do the following steps:

  1. Download firmware from download area
  2. Connect to the phone
  3. Click on the ... button under the Flash tag
  4. Select *.sbf file in the firmware folder
    5. If you have a scatter firmware, change extention filter in the Open Firmware Dialog to "*sca" and select scatter file. We dont provide firmware in scatter format but you can find it in the internet.
  5. Click on the 'Firmware' button in the 'Flash' section
  6. Wait untill firmware download process finishes
  7. Disconnect the phone
  8. Switch on the phone and wait until it bootes. The boot process after firmware download can last up to 40 minutes. Please be patient


Repair Imei

  • This operation is paid. It costs 10 credits.
  • The operation of changing imei changes all imei numbers at once. Please be careful.
  • Flashing new firmware restores the original imei.
  • You dont need to root the handset or flash twrp or other recoveries. EasyBox Mtk doesnt need root or other things to change imei numbers. It works directly with handset flash device.
  • Internet connection is required to perform imei changing operation.
  • EasyBox Mtk prints the original imei numbers, than new imei numbers if they were already changed.
  • If you need to restore the original imei, you need to flash firmware. It will automatically restore default imeis
You can check imei numbers by typing *#06# in the dialing window of the handset.

To change imei numbers do the following steps

  1. Connect to the phone
  2. Change all imei numbers to the values you want at the right bottom side of the window
  3. Press "Repair IMEI" button
  4. Wait until 'IMEI successfully repaired' appears in the log
  5. Disconnect the phone
  6. Switch on the handset and check new imei numbers.


Factory Reset

To make factory reset do the following steps

  1. Connect to the phone
  2. Press 'Factory reset' button
  3. Disconnect the phone
  4. Switch on the handest and wait until initializing process is finished


Reset FRP

To reset FRP do the following steps
  1. Connect to the phone
  2. Press 'Reset frp' button
  3. Wait until 'FRP Resetting complete' appears in the log
  4. Disconnect the phone


Dump security

Dump security operation is helpful when you want to backup security data before unlocking the phone

To dump security area do the following steps
  1. Connect to the phone
  2. Press 'Dump security' button and select the name for the file to save
  3. Wait until 'Dump security success' appears in the log
  4. Disconnect the phone


Flash security

Flash security operation can be helpful when you want to restore simlock of the unlocked handset

To flash security area do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with security backup
  4. Press "Security" button in the 'Flash' section
  5. Wait until 'Flashing security success' appears in the log
  6. Disconnect the phone


Repair provider id

You need to repair provider id if you reflash the handset to the firmware of the relevant model. For example 5060D to 5060K

Before changing any data in the handset flash memory, EasyBox Mtk dumps all product info partition into the file in the 'backups' folder. You always can restore provider id by flashing this backup file back to the handset.

To repair provider id do the following steps

  1. Connect to the phone
  2. Change probider id value to the value you want at the right bottom side of the window
  3. Press "Repair Provider id" button
  4. Wait until 'IMEI successfully repaired' appears in the log
  5. Disconnect the phone


Flash product info

You can flash product info back to restore original Provider Id

To flash product info do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with product info backup
  4. Press "Product info" button in the 'Flash' section
  5. Wait until 'Flashing product info success' appears in the log
  6. Disconnect the phone