Admin

Alcatel PIXI 4 (5) LTE 5045D

5045D


Supported operations


Drivers


Connection

  • All drivers should be installed before connection.
  • You dont need to perform connect and disconnect operation every time you make an operation with handset. Connection should be done once before doing any operations with handset. After all operations with hansdset are complete, disconnect.
  • The phone battery should be charged on 40 percent or more before performing any operation on it! In case battery uncharges during work process, the phone wont switch on and charge battery. In this case you will have to take out the battery from the phone and charge it with external charger.
  • Use usb ports placed on the backside of PC to connect to the phone
  • Do not connect or disconnect other USB cables into the PC during performing operation with the phone
  • Dont use USB HUBs, long or very thin USB cables.
  • In case 'Read flash failed' or 'Write flash failed' error appears in the log, try to change the PC or reinstall drivers

Connection Cable: micro usb

To connect to the handset do the following steps:

  1. Go to 'direct services' Tab
  2. Choose your handset model in the combobox at the upper left side of the window
  3. Disconnect the handset from the cable.
  4. Remove battery from the handset.
  5. Push Connect button in the application form
  6. Insert battery and connect cable to the phone. The battery should be charged
  7. You should see the 'Phone found. Sending loader' strings in the Log
    8. If the handset began to load(you see the 'Alcatel' logo), the connection with handset failed! Click on 'Cancel', disconnect the pnone, switch it on, than switch it off and repeat 'Connection' procedure once more. If it doesnt help, try relaunching EasyBox Mtk application, install drivers or charge phones battery.

To disconnect the handset do the following steps:

  1. Click on 'Disconnect' button
  2. Disconnect the cable from the handset.
Never unplug cable until ongoing operations are finished. This can lead to bricking your phone.


Get Info

If you need to print the information about connected phone once more, you can click on Get Info button. This operation is read only and doesnt change anything inside of the phone.
The following information is printed:
  • Imei numbers
  • Provider Id
  • Simlock information
  • Frp information
  • Firmware version
  • Android version
  • Firmware compilation date time


Unlock

Before changing any data in the handset flash memory, EasyBox Mtk dumps all security partitions into the file in the 'backups' folder. You always can restore lock data by flashing the security backup file back to the handset.

To unlock the handset do the following steps:

  1. Connect to the phone
  2. Click on the Unlock button
  3. Wait until 'Phone successfully unlocked' appears in the log
  4. Disconnect the phone


Flash firmware

Supported provider ids

2A2UAM1 2AALAE1 2AALAP1 2AALAP1-6 2AALAV1 2AALAV1-1 2AALDZ1 2AALE11 2AALE11-1 2AALE11-2 2AALE31 2AALFR1 2AALFR1-1 2AALFR1-15 2AALGE1 2AALMY1 2AALND1 2AALPH1 2AALPH1-5 2AALRU1 2AALRU1-1 2AALRU1-1B1 2AALRU1-2 2AALTH1 2AALTM1 2AALTN1 2AALUA1 2AALWE1 2AALWE1-1 2AALWE1-2 2ABGGE1 2ABGRU1 2ABYFR1 2ABYFR1-5R 2AGLPH1 2AL3BY3 2ALPFR1 2ALPFR1-1 2ARGMG3 2ARGML3 2ARGSN3 2AVNRS1 2BALAE1 2BALAP1 2BALAV1 2BALAV1-B 2BALDZ1 2BALE11 2BALE11-1 2BALE31 2BALFR1 2BALFR1-1 2BALFR1-P 2BALGE1 2BALMY1 2BALND1 2BALPH1 2BALRU1 2BALRU1-1 2BALRU1-2 2BALTH1 2BALTM1 2BALTN1 2BALUA1 2BALWE1 2BALWE1-1 2BALWE1-2 2BBGGE1 2BBGRU1 2BBYFR1 2BL3BY3 2BLPFR1 2BRGMG3 2BRGML3 2BRGSN3 2BVNRS1 2C2UAM1 2CALAE1 2CALAP1 2CALAV1 2CALDZ1 2CALE11 2CALE11-1 2CALE31 2CALFR1 2CALFR1-1 2CALFR1-2S50 2CALGE1 2CALMY1 2CALND1 2CALPH1 2CALRU1 2CALRU1-1 2CALRU1-2 2CALRU1-S40 2CALTH1 2CALTM1 2CALTN1 2CALUA1 2CALWE1 2CALWE1-5 2CBGGE1 2CBGRU1 2CBYFR1 2CL3BY3 2CLPFR1 2CRGMG3 2CRGML3 2CRGSN3 2CVNRS1 2D2UAM1 2DALAE1 2DALAP1 2DALAV1 2DALDZ1 2DALE11 2DALE11-1 2DALE31 2DALFR1 2DALFR1-1 2DALFR1-P 2DALGE1 2DALMY1 2DALND1 2DALPH1 2DALRU1 2DALRU1-1 2DALTH1 2DALTM1 2DALTN1 2DALUA1 2DALWE1 2DBGGE1 2DBGRU1 2DBYFR1 2DL3BY3 2DLPFR1 2DRGMG3 2DRGML3 2DRGSN3 2DVNRS1 2FALAE1 2FALAP1 2FALAV1 2FALDZ1 2FALE11 2FALE11-1 2FALE31 2FALFR1 2FALFR1-1 2FALGE1 2FALMY1 2FALPH1 2FALRU1 2FALRU1-1 2FALTH1 2FALTM1 2FALTN1 2FALUA1 2FALWE1 2FBGGE1 2FBGRU1 2FBYFR1 2FL3BY3 2FLPFR1 2FRGML3 2FVNRS1 2KALAP1 2KALDZ1 2KALFR1 2KALFR1-1 2KALRU1 2KALTN1 2KALUA1 2KALWE1 2KBYFR1 2KLPFR1 2KVNRS1 2LALAP1 2LALDZ1 2LALFR1 2LALRU1 2LALTN1 2LALUA1 2LALWE1 2LBGRU1 2LVNRS1 2MALAP1 2MALDZ1 2MALFR1 2MALFR1-1 2MALRU1 2MALUA1 2MVNRS1 2NALAE1 2NALAP1 2NALDZ1 2NALFR1 2NALPH1 2NALRU1 2NALTN1 2NALUA1 2NALWE1 2NBGRU1 2NVNRS1

You can find your phone Provider Id in logs during connection or 'get info' operation.
Example: 5045D-2A2UAM1
Also you can find the CU under the battery above imei numbers.

  • Flash firmware process erases FRP and USERDATA partitions. All user data will be lost. Please save all important data from the phones internal memory to safe place before doing flash firmware.
  • You can flash firmware for different providers but this can lead to bricking your phone. You can always return to the original firmware.

To flash firmware on the handset do the following steps:

  1. Download firmware from download area
  2. Connect to the phone
  3. Click on the ... button under the Flash tag
  4. Select *.sbf file in the firmware folder
    5. If you have a scatter firmware, change extention filter in the Open Firmware Dialog to "*sca" and select scatter file. We dont provide firmware in scatter format but you can find it in the internet.
  5. Click on the 'Firmware' button in the 'Flash' section
  6. Wait untill firmware download process finishes
  7. Disconnect the phone
  8. Switch on the phone and wait until it bootes. The boot process after firmware download can last up to 40 minutes. Please be patient


Repair Imei

  • This operation is paid. It costs 10 credits.
  • The operation of changing imei changes all imei numbers at once. Please be careful.
  • Flashing new firmware restores the original imei.
  • You dont need to root the handset or flash twrp or other recoveries. EasyBox Mtk doesnt need root or other things to change imei numbers. It works directly with handset flash device.
  • Internet connection is required to perform imei changing operation.
  • EasyBox Mtk prints the original imei numbers, than new imei numbers if they were already changed.
  • If you need to restore the original imei, you need to flash firmware. It will automatically restore default imeis
You can check imei numbers by typing *#06# in the dialing window of the handset.

To change imei numbers do the following steps

  1. Connect to the phone
  2. Change all imei numbers to the values you want at the right bottom side of the window
  3. Press "Repair IMEI" button
  4. Wait until 'IMEI successfully repaired' appears in the log
  5. Disconnect the phone
  6. Switch on the handset and check new imei numbers.


Factory Reset

To make factory reset do the following steps

  1. Connect to the phone
  2. Press 'Factory reset' button
  3. Disconnect the phone
  4. Switch on the handest and wait until initializing process is finished


Reset FRP

To reset FRP do the following steps
  1. Connect to the phone
  2. Press 'Reset frp' button
  3. Wait until 'FRP Resetting complete' appears in the log
  4. Disconnect the phone


Dump security

Dump security operation is helpful when you want to backup security data before unlocking the phone

To dump security area do the following steps
  1. Connect to the phone
  2. Press 'Dump security' button and select the name for the file to save
  3. Wait until 'Dump security success' appears in the log
  4. Disconnect the phone


Flash security

Flash security operation can be helpful when you want to restore simlock of the unlocked handset

To flash security area do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with security backup
  4. Press "Security" button in the 'Flash' section
  5. Wait until 'Flashing security success' appears in the log
  6. Disconnect the phone


Repair provider id

You need to repair provider id if you reflash the handset to the firmware of the relevant model. For example 5060D to 5060K

Before changing any data in the handset flash memory, EasyBox Mtk dumps all product info partition into the file in the 'backups' folder. You always can restore provider id by flashing this backup file back to the handset.

To repair provider id do the following steps

  1. Connect to the phone
  2. Change probider id value to the value you want at the right bottom side of the window
  3. Press "Repair Provider id" button
  4. Wait until 'IMEI successfully repaired' appears in the log
  5. Disconnect the phone


Flash product info

You can flash product info back to restore original Provider Id

To flash product info do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with product info backup
  4. Press "Product info" button in the 'Flash' section
  5. Wait until 'Flashing product info success' appears in the log
  6. Disconnect the phone