Alcatel PIXI 3 (4.5) LTE 5017A

5017A


Supported operations


Drivers


Connection

  • All drivers should be installed before connection.
  • You dont need to perform connect and disconnect operation every time you make an operation with handset. Connection should be done once before doing any operations with handset. After all operations with hansdset are complete, disconnect.
  • The phone battery should be charged on 40 percent or more before performing any operation on it! In case battery uncharges during work process, the phone wont switch on and charge battery. In this case you will have to take out the battery from the phone and charge it with external charger.
  • Use usb ports placed on the backside of PC to connect to the phone
  • Do not connect or disconnect other USB cables into the PC during performing operation with the phone
  • Dont use USB HUBs, long or very thin USB cables.
  • In case 'Read flash failed' or 'Write flash failed' error appears in the log, try to change the PC or reinstall drivers

Connection Cable: micro usb

To connect to the handset do the following steps:

  1. Go to 'direct services' Tab
  2. Choose your handset model in the combobox at the upper left side of the window
  3. Disconnect the handset from the cable.
  4. Remove battery from the handset.
  5. Push Connect button in the application form
  6. Insert battery and connect cable to the phone. The battery should be charged
  7. You should see the 'Phone found. Sending loader' strings in the Log
  8. If the handset began to load(you see the 'Alcatel' logo), the connection with handset failed! Click on 'Cancel', disconnect the pnone, switch it on, than switch it off and repeat 'Connection' procedure once more. If it doesnt help, try relaunching EasyBox Mtk application, install drivers or charge phones battery.

To disconnect the handset do the following steps:

  1. Click on 'Disconnect' button
  2. Disconnect the cable from the handset.
Never unplug cable until ongoing operations are finished. This can lead to bricking your phone.


Get Info

If you need to print the information about connected phone once more, you can click on Get Info button. This operation is read only and doesnt change anything inside of the phone.
The following information is printed:
  • Imei numbers
  • Provider Id
  • Simlock information
  • Frp information
  • Firmware version
  • Android version
  • Firmware compilation date time


Unlock

Before changing any data in the handset flash memory, EasyBox Mtk dumps all security partitions into the file in the 'backups' folder. You always can restore lock data by flashing the security backup file back to the handset.

To unlock the handset do the following steps:

  1. Connect to the phone
  2. Click on the Unlock button
  3. Wait until 'Phone successfully unlocked' appears in the log
  4. Disconnect the phone


Flash firmware

Supported provider ids

2AAGCC1 2AAVCL1 2AAVCL3 2AAVDO3 2AAVEC3 2AAVGT1 2AAVHN1 2AAVNI1 2AAVPY3 2AAVUY3 2AC9PC1 2AEEPE1 2ALDBO1 2APSPY1 2ATIVE1 2ATLCL1 2ATLCO1 2ATLEC3 2ATLGT1 2ATLMX1 2ATLNI1 2ATLPE3 2ATLUY1 2ATUAU1 2AVDFJ1 2AVWCL1 2BAVCL1 2BAVCL3 2BAVDO3 2BAVEC3 2BAVGT1 2BAVHN1 2BAVNI1 2BAVUY3 2BC9PC1 2BEEPE1 2BLDBO1 2BPSPY1 2BTIVE1 2BTLCL1 2BTLCO1 2BTLEC3 2BTLGT1 2BTLMX1 2BTLNI1 2BTLPE3 2BTLUY1 2BTUAU1 2BVDFJ1 2BVWCL1 2CALCO1 2CAVCL1 2CAVCL3 2CAVDO3 2CAVGT1 2CAVHN1 2CAVNI1 2CAVUY3 2CC9PC1 2CEEPE1 2CLDBO1 2CPSPY1 2CTIVE1 2CTLCL1 2CTLCO1 2CTLCO1-1 2CTLEC3 2CTLGT1 2CTLMX1 2CTLNI1 2CTLPE3 2CTLUY1 2CTUAU1 2CVDFJ1 2DAVCL1 2DAVCL3 2DAVDO3 2DAVGT1 2DAVHN1 2DAVNI1 2DAVUY3 2DC9PC1 2DEEPE1 2DLDBO1 2DPSPY1 2DTIVE1 2DTLCL1 2DTLCO1 2DTLGT1 2DTLMX1 2DTLNI1 2DTLPE3 2DTLUY1 2DTUAU1 2DVDFJ1 2EAVCL1 2EAVCL3 2EAVDO3 2EAVGT1 2EAVHN1 2EAVNI1 2EAVUY3 2EC9PC1 2EEEPE1 2EPSPY1 2ETIVE1 2ETLCL1 2ETLCO1 2ETLGT1 2ETLMX1 2ETLNI1 2ETLPE3 2ETLUY1 2ETUAU1 2EVDFJ1 2FAVCL1 2FAVCL3 2FAVDO3 2FAVGT1 2FAVHN1 2FAVNI1 2FAVUY3 2FC9PC1 2FLDBO1 2FTIVE1 2FTLCL1 2FTLCO1 2FTLGT1 2FTLMX1 2FTLNI1 2FTLPE3 2FTLUY1 2FTUAU1 2FVDFJ1 2HAVCL1 2HAVCL3 2HAVGT1 2HAVHN1 2HAVNI1 2HC9PC1 2HPSPY1 2HTLCL1 2HTLCO1 2HTLNI1 2HTLUY1 2HTUAU1 2HVDFJ1 AAAVAR1 AAOFAR1 AAPSAR1 AATLAR1 ABAVAR1 ABPSAR1 ABTLAR1 ADTLAR1 GAAVEC1 GBAVEC1 GCAVEC1 HAAVAR1 HAPSAR1 HATLAR1 HBPSAR1 HBTLAR1 JAAVBR3

You can find your phone Provider Id in logs during connection or 'get info' operation.
Example: 5017A-2AAGCC1
Also you can find the CU under the battery above imei numbers.

  • Flash firmware process erases FRP and USERDATA partitions. All user data will be lost. Please save all important data from the phones internal memory to safe place before doing flash firmware.
  • You can flash firmware for different providers but this can lead to bricking your phone. You can always return to the original firmware.

To flash firmware on the handset do the following steps:

  1. Download firmware from download area
  2. Connect to the phone
  3. Click on the ... button under the Flash tag
  4. Select *.sbf file in the firmware folder
  5. If you have a scatter firmware, change extention filter in the Open Firmware Dialog to "*sca" and select scatter file. We dont provide firmware in scatter format but you can find it in the internet.
  6. Click on the 'Firmware' button in the 'Flash' section
  7. Wait untill firmware download process finishes
  8. Disconnect the phone
  9. Switch on the phone and wait until it bootes. The boot process after firmware download can last up to 40 minutes. Please be patient


Repair Imei

  • This operation is paid. It costs 10 credits.
  • The operation of changing imei changes all imei numbers at once. Please be careful.
  • Flashing new firmware restores the original imei.
  • You dont need to root the handset or flash twrp or other recoveries. EasyBox Mtk doesnt need root or other things to change imei numbers. It works directly with handset flash device.
  • Internet connection is required to perform imei changing operation.
  • EasyBox Mtk prints the original imei numbers, than new imei numbers if they were already changed.
  • If you need to restore the original imei, you need to flash firmware. It will automatically restore default imeis
You can check imei numbers by typing *#06# in the dialing window of the handset.

To change imei numbers do the following steps

  1. Connect to the phone
  2. Change all imei numbers to the values you want at the right bottom side of the window
  3. Press "Repair IMEI" button
  4. Wait until 'IMEI successfully repaired' appears in the log
  5. Disconnect the phone
  6. Switch on the handset and check new imei numbers.


Factory Reset

To make factory reset do the following steps

  1. Connect to the phone
  2. Press 'Factory reset' button
  3. Disconnect the phone
  4. Switch on the handest and wait until initializing process is finished


Reset FRP

To reset FRP do the following steps
  1. Connect to the phone
  2. Press 'Reset frp' button
  3. Wait until 'FRP Resetting complete' appears in the log
  4. Disconnect the phone


Dump security

Dump security operation is helpful when you want to backup security data before unlocking the phone

To dump security area do the following steps
  1. Connect to the phone
  2. Press 'Dump security' button and select the name for the file to save
  3. Wait until 'Dump security success' appears in the log
  4. Disconnect the phone


Flash security

Flash security operation can be helpful when you want to restore simlock of the unlocked handset

To flash security area do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with security backup
  4. Press "Security" button in the 'Flash' section
  5. Wait until 'Flashing security success' appears in the log
  6. Disconnect the phone


Repair provider id

You need to repair provider id if you reflash the handset to the firmware of the relevant model. For example 5060D to 5060K

Before changing any data in the handset flash memory, EasyBox Mtk dumps all product info partition into the file in the 'backups' folder. You always can restore provider id by flashing this backup file back to the handset.

To repair provider id do the following steps

  1. Connect to the phone
  2. Change probider id value to the value you want at the right bottom side of the window
  3. Press "Repair Provider id" button
  4. Wait until 'IMEI successfully repaired' appears in the log
  5. Disconnect the phone


Flash product info

You can flash product info back to restore original Provider Id

To flash product info do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with product info backup
  4. Press "Product info" button in the 'Flash' section
  5. Wait until 'Flashing product info success' appears in the log
  6. Disconnect the phone