Admin

Alcatel POP C9 7047D

7047D


Supported operations


Drivers


Connection

  • All drivers should be installed before connection.
  • You dont need to perform connect and disconnect operation every time you make an operation with handset. Connection should be done once before doing any operations with handset. After all operations with hansdset are complete, disconnect.
  • The phone battery should be charged on 40 percent or more before performing any operation on it! In case battery uncharges during work process, the phone wont switch on and charge battery. In this case you will have to disassemble the phone, take out internal battery and charge it with external charger.
  • Use usb ports placed on the backside of PC to connect to the phone
  • Do not connect or disconnect other USB cables into the PC during performing operation with the phone
  • Dont use USB HUBs, long or very thin USB cables.
  • In case 'Read flash failed' or 'Write flash failed' error appears in the log, try to change the PC or reinstall drivers

Connection Cable: micro usb

To connect to the handset do the following steps:

  1. Go to 'direct services' Tab
  2. Choose your handset model in the combobox at the upper left side of the window
  3. If the phone is connected to the pc - disconnect it.
  4. Switch off the phone
  5. Push Connect button in the application form
  6. Connect cable to the phone. The battery should be charged

To disconnect the handset do the following steps:

  1. Click on 'Disconnect' button
  2. Disconnect the cable from the handset.
Never unplug cable until ongoing operations are finished. This can lead to bricking your phone.


Get Info

If you need to print the information about connected phone once more, you can click on Get Info button. This operation is read only and doesnt change anything inside of the phone.
The following information is printed:
  • Imei numbers
  • Provider Id
  • Simlock information
  • Frp information
  • Firmware version
  • Android version
  • Firmware compilation date time


Unlock

Before changing any data in the handset flash memory, EasyBox Mtk dumps all security partitions into the file in the 'backups' folder. You always can restore lock data by flashing the security backup file back to the handset.

To unlock the handset do the following steps:

  1. Connect to the phone
  2. Click on the Unlock button
  3. Wait until 'Phone successfully unlocked' appears in the log
  4. Disconnect the phone


Flash firmware

Supported provider ids

2A2DNZ1 2AALAE1 2AALAM1 2AALAP1 2AALAP1-6 2AALAT1 2AALAZ1 2AALAZ1-1 2AALBD1 2AALBD1-1 2AALBE1 2AALBG1 2AALBY1 2AALBY1-4 2AALBY1-41 2AALBY1-42 2AALBY1-43 2AALCZ1 2AALCZ1-1 2AALDE1 2AALDE1-5 2AALDe1 2AALEG1 2AALFR1 2AALFR1-1 2AALFR1-15 2AALGE1 2AALGH1 2AALGR1 2AALGR1-3 2AALGR1-P 2AALGR1-S40 2AALHK1 2AALIB1 2AALIB1-P 2AALIN1 2AALIR1 2AALIT1 2AALIT1-S40 2AALKE1 2AALMA1 2AALME1 2AALMM1 2AALNG1 2AALNL1 2AALPL1 2AALRO1 2AALRS1 2AALRU1 2AALRU1-1 2AALRU1-1B1 2AALRU1-2 2AALSG1 2AALTH1 2AALUA1 2AALVN2 2AALZA1 2AC2PH1 2AC2PH1-S40 2AC6CV3 2ACFMK1 2ACYMY1 2AHHTW1 2AIJIN3 2AKSKH1 2AKSKH3 2AP3PL1 2ARGML1 2AS7RS1 2AVDFJ1 2AVPIN1 2AVPLK1 2B2DNZ1 2BALAE1 2BALAM1 2BALAP1 2BALAT1 2BALAZ1 2BALAZ1-1 2BALBD1 2BALBD1-1 2BALBE1 2BALBG1 2BALBY1 2BALBY1-4 2BALCZ1 2BALCZ1-1 2BALDE1 2BALDE1-E 2BALEG1 2BALFR1 2BALFR1-1 2BALFR1-P 2BALGE1 2BALGH1 2BALGR1 2BALGR1-3 2BALGR1-S40 2BALHK1 2BALIB1 2BALIN1 2BALIR1 2BALIT1 2BALIT1-S40 2BALKE1 2BALMA1 2BALME1 2BALMM1 2BALNG1 2BALNL1 2BALPL1 2BALRO1 2BALRS1 2BALRU1 2BALRU1-1 2BALRU1-2 2BALSG1 2BALTH1 2BALUA1 2BALVN2 2BALZA1 2BC2PH1 2BC6CV3 2BCFMK1 2BCYMY1 2BHHTW1 2BIJIN3 2BKSKH1 2BKSKH3 2BP3PL1 2BRGML1 2BS7RS1 2BS7RS1-1 2BVDFJ1 2BVPIN1 2BVPLK1 2C2DNZ1 2CALAE1 2CALAM1 2CALAP1 2CALAT1 2CALAT1-1 2CALAZ1 2CALAZ1-1 2CALBD1 2CALBE1 2CALBG1 2CALBY1 2CALBY1-4 2CALCZ1 2CALCZ1-1 2CALCZ1-1P 2CALDE1 2CALDE1-1P 2CALDE1-S40 2CALEG1 2CALFR1 2CALFR1-1 2CALFR1-2S50 2CALGE1 2CALGH1 2CALGR1 2CALHK1 2CALIB1 2CALIN1 2CALIR1 2CALIT1 2CALIT1-P 2CALIT1-S40 2CALKE1 2CALMA1 2CALME1 2CALMM1 2CALNL1 2CALPL1 2CALPL1-1P 2CALRO1 2CALRS1 2CALRU1 2CALRU1-1 2CALRU1-2 2CALRU1-S40 2CALSG1 2CALTH1 2CALUA1 2CALVN2 2CALZA1 2CC2PH1 2CC6CV3 2CCFMK1 2CHHTW1 2CIJIN3 2CKSKH1 2CKSKH3 2CP3PL1 2CRGML1 2CS7RS1 2CVDFJ1 2CVPIN1 2CVPLK1 2D2DNZ1 2DALAE1 2DALAM1 2DALAP1 2DALAT1 2DALAZ1 2DALAZ1-1 2DALBD1 2DALBE1 2DALBG1 2DALBY1 2DALCZ1 2DALCZ1-1 2DALDE1 2DALEG1 2DALFR1 2DALFR1-1 2DALFR1-P 2DALGE1 2DALGH1 2DALGR1 2DALHK1 2DALIB1 2DALIN1 2DALIR1 2DALIT1 2DALIT1-S40 2DALKE1 2DALMA1 2DALME1 2DALMM1 2DALNL1 2DALPL1 2DALRO1 2DALRS1 2DALRU1 2DALRU1-1 2DALSG1 2DALTH1 2DALUA1 2DALVN2 2DALZA1 2DC2PH1 2DC6CV3 2DCFMK1 2DHHTW1 2DIJIN3 2DKSKH1 2DKSKH3 2DP3PL1 2DP3Pl1 2DRGML1 2DS7RS1 2DVDFJ1 2DVPIN1 2DVPLK1 2E2DNZ1 2EALAE1 2EALAM1 2EALAP1 2EALAT1 2EALAZ1 2EALAZ1-1 2EALBD1 2EALBE1 2EALBG1 2EALBY1 2EALBY1-4 2EALCZ1 2EALDE1 2EALEG1 2EALFR1 2EALFR1-1 2EALFR1-P 2EALGE1 2EALGH1 2EALGR1 2EALHK1 2EALIB1 2EALIN1 2EALIR1 2EALIT1 2EALKE1 2EALMA1 2EALME1 2EALMM1 2EALNL1 2EALPL1 2EALRO1 2EALRS1 2EALRU1 2EALRU1-1 2EALRU1-2 2EALSG1 2EALTH1 2EALUA1 2EALUA1-1 2EALVN2 2EALZA1 2EC2PH1 2EC6CV3 2ECFMK1 2EHHTW1 2EIJIN3 2EKSKH1 2EKSKH3 2EP3PL1 2ERGML1 2ES7RS1 2EVDFJ1 2EVPIN1 2EVPLK1 2F2DNZ1 2FALAE1 2FALAM1 2FALAP1 2FALAT1 2FALAZ1 2FALAZ1-1 2FALBD1 2FALBE1 2FALBG1 2FALBY1 2FALBY1-4 2FALCZ1 2FALDE1 2FALEG1 2FALFR1 2FALFR1-1 2FALGE1 2FALGH1 2FALGR1 2FALHK1 2FALIB1 2FALIN1 2FALIR1 2FALIT1 2FALIT1-S50 2FALKE1 2FALMA1 2FALME1 2FALMM1 2FALNL1 2FALPL1 2FALRO1 2FALRS1 2FALRU1 2FALRU1-1 2FALSG1 2FALTH1 2FALUA1 2FALVN2 2FALZA1 2FC2PH1 2FCFMK1 2FIJIN3 2FKSKH1 2FKSKH3 2FP3PL1 2FRGML1 2FS7RS1 2FVDFJ1 2FVPIN1 2FVPLK1 2aalPL1 2aalpl1 2ap3PL1 2ap3pl1 2balpl1 2bp3PL1 2bp3pl1 2cp3PL1 2dalgr1 2dp3pl1 2ealpl1

You can find your phone Provider Id in logs during connection or 'get info' operation.
Example: 7047D-2A2DNZ1
Also you can find the CU on the back side of the handset above imei numbers.

  • Flash firmware process erases FRP and USERDATA partitions. All user data will be lost. Please save all important data from the phones internal memory to safe place before doing flash firmware.
  • You can flash firmware for different providers but this can lead to bricking your phone. You can always return to the original firmware.

To flash firmware on the handset do the following steps:

  1. Download firmware from download area
  2. Connect to the phone
  3. Click on the ... button under the Flash tag
  4. Select *.sbf file in the firmware folder
    5. If you have a scatter firmware, change extention filter in the Open Firmware Dialog to "*sca" and select scatter file. We dont provide firmware in scatter format but you can find it in the internet.
  5. Click on the 'Firmware' button in the 'Flash' section
  6. Wait untill firmware download process finishes
  7. Disconnect the phone
  8. Switch on the phone and wait until it bootes. The boot process after firmware download can last up to 40 minutes. Please be patient


Factory Reset

To make factory reset do the following steps

  1. Connect to the phone
  2. Press 'Factory reset' button
  3. Disconnect the phone
  4. Switch on the handest and wait until initializing process is finished


Reset FRP

To reset FRP do the following steps
  1. Connect to the phone
  2. Press 'Reset frp' button
  3. Wait until 'FRP Resetting complete' appears in the log
  4. Disconnect the phone


Dump security

Dump security operation is helpful when you want to backup security data before unlocking the phone

To dump security area do the following steps
  1. Connect to the phone
  2. Press 'Dump security' button and select the name for the file to save
  3. Wait until 'Dump security success' appears in the log
  4. Disconnect the phone


Flash security

Flash security operation can be helpful when you want to restore simlock of the unlocked handset

To flash security area do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with security backup
  4. Press "Security" button in the 'Flash' section
  5. Wait until 'Flashing security success' appears in the log
  6. Disconnect the phone


Repair provider id

You need to repair provider id if you reflash the handset to the firmware of the relevant model. For example 5060D to 5060K

Before changing any data in the handset flash memory, EasyBox Mtk dumps all product info partition into the file in the 'backups' folder. You always can restore provider id by flashing this backup file back to the handset.

To repair provider id do the following steps

  1. Connect to the phone
  2. Change probider id value to the value you want at the right bottom side of the window
  3. Press "Repair Provider id" button
  4. Wait until 'IMEI successfully repaired' appears in the log
  5. Disconnect the phone


Flash product info

You can flash product info back to restore original Provider Id

To flash product info do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with product info backup
  4. Press "Product info" button in the 'Flash' section
  5. Wait until 'Flashing product info success' appears in the log
  6. Disconnect the phone