Admin

Alcatel PIXI 4 (5) LTE 5045X

5045X


Supported operations


Drivers


Connection

  • All drivers should be installed before connection.
  • You dont need to perform connect and disconnect operation every time you make an operation with handset. Connection should be done once before doing any operations with handset. After all operations with hansdset are complete, disconnect.
  • The phone battery should be charged on 40 percent or more before performing any operation on it! In case battery uncharges during work process, the phone wont switch on and charge battery. In this case you will have to take out the battery from the phone and charge it with external charger.
  • Use usb ports placed on the backside of PC to connect to the phone
  • Do not connect or disconnect other USB cables into the PC during performing operation with the phone
  • Dont use USB HUBs, long or very thin USB cables.
  • In case 'Read flash failed' or 'Write flash failed' error appears in the log, try to change the PC or reinstall drivers

Connection Cable: micro usb

To connect to the handset do the following steps:

  1. Go to 'direct services' Tab
  2. Choose your handset model in the combobox at the upper left side of the window
  3. Disconnect the handset from the cable.
  4. Remove battery from the handset.
  5. Push Connect button in the application form
  6. Insert battery and connect cable to the phone. The battery should be charged
  7. You should see the 'Phone found. Sending loader' strings in the Log
    8. If the handset began to load(you see the 'Alcatel' logo), the connection with handset failed! Click on 'Cancel', disconnect the pnone, switch it on, than switch it off and repeat 'Connection' procedure once more. If it doesnt help, try relaunching EasyBox Mtk application, install drivers or charge phones battery.

To disconnect the handset do the following steps:

  1. Click on 'Disconnect' button
  2. Disconnect the cable from the handset.
Never unplug cable until ongoing operations are finished. This can lead to bricking your phone.


Get Info

If you need to print the information about connected phone once more, you can click on Get Info button. This operation is read only and doesnt change anything inside of the phone.
The following information is printed:
  • Imei numbers
  • Provider Id
  • Simlock information
  • Frp information
  • Firmware version
  • Android version
  • Firmware compilation date time


Unlock

Before changing any data in the handset flash memory, EasyBox Mtk dumps all security partitions into the file in the 'backups' folder. You always can restore lock data by flashing the security backup file back to the handset.

To unlock the handset do the following steps:

  1. Connect to the phone
  2. Click on the Unlock button
  3. Wait until 'Phone successfully unlocked' appears in the log
  4. Disconnect the phone


Flash firmware

Supported provider ids

2AALAP1 2AALAP1-6 2AALGB1 2AALGB1-1 2AALGB1-2 2AALGB1-3 2AALHR1 2AALHR1-1 2AALIB1 2AALIB1-P 2AALIE1 2AALIE1-1 2AALIE1-2 2AALIE1-S5 2AALIT1 2AALIT1-S40 2AALMA1 2AALND1 2AALPL1 2AAMMA1 2AE8GB1 2AEAFI1 2AGOMT1 2AGOMT1-P 2AKPNL1 2AMCMA1 2AMPBG1 2AMWIE1 2AMWIE1-1 2AOBGB2 2APWGB1 2APWGB1-1 2APWGBK 2ARGMC3 2ARGPL1 2ATBAL1 2ATBCZ1 2ATBGR1 2ATBHR1 2ATBME1 2ATBMK1 2ATBPL1 2ATBPL1-S40 2ATBRO1 2ATIIT1 2ATIIT1-P 2ATIIT3 2ATIIT3-P 2ATMCV1 2ATNRS1 2AVDMK1 2AVIHI1 2AVVBG1 2AWNIT3 2BALAP1 2BALGB1 2BALGB1-1 2BALGB1-2 2BALHR1 2BALIB1 2BALIE1 2BALIE1-S5 2BALIT1 2BALIT1-S40 2BALMA1 2BALND1 2BALPL1 2BAMMA1 2BE8GB1 2BE8GB1-1 2BE8GBK 2BE8GBK-1 2BEAFI1 2BGOMT1 2BKPNL1 2BMCMA1 2BMPBG1 2BMWIE1 2BOBGB2 2BPWGB1 2BPWGBK 2BRGMC3 2BRGPL1 2BRGPL1-P 2BTBAL1 2BTBCZ1 2BTBGR1 2BTBGR1-S40 2BTBHR1 2BTBME1 2BTBMK1 2BTBPL1 2BTBRO1 2BTIIT1 2BTIIT1-S40 2BTIIT3 2BTIIT3-R 2BTMCV1 2BTNRS1 2BVDMK1 2BVIHI1 2BVVBG1 2BWNIT3 2CALAP1 2CALGB1 2CALGB1-1 2CALGB1-P 2CALHR1 2CALHR1-P 2CALIB1 2CALIE1 2CALIT1 2CALIT1-P 2CALIT1-S40 2CALMA1 2CALND1 2CALPL1 2CALPL1-1P 2CAMMA1 2CE8GB1 2CGOMT1 2CKPNL1 2CMCMA1 2CMPBG1 2CMWIE1 2COBGB2 2COBGB2-1 2CPWGB1 2CPWGBK 2CRGPL1 2CTBAL1 2CTBCZ1 2CTBGR1 2CTBHR1 2CTBME1 2CTBMK1 2CTBPL1 2CTBRO1 2CTIIT1 2CTIIT3 2CTMCV1 2CTNRS1 2CVDMK1 2CVIHI1 2CVVBG1 2CWNIT3 2DALAP1 2DALGB1 2DALHR1 2DALIB1 2DALIE1 2DALIT1 2DALIT1-S40 2DALMA1 2DALND1 2DALPL1 2DAMMA1 2DKPNL1 2DMCMA1 2DMPBG1 2DMWIE1 2DOBGB2 2DPWGB1 2DPWGB1-1 2DPWGBK 2DRGPL1 2DTBAL1 2DTBCZ1 2DTBGR1 2DTBHR1 2DTBME1 2DTBMK1 2DTBPL1 2DTBRO1 2DTIIT1 2DTIIT3 2DTMCV1 2DTNRS1 2DVDMK1 2DVIHI1 2DVVBG1 2DWNIT3 2DWNIT3-S40 2FALAP1 2FALGB1 2FALHR1 2FALIB1 2FALIE1 2FALIT1 2FALIT1-S50 2FALMA1 2FALPL1 2FAMMA1 2FKPNL1 2FMCMA1 2FMPBG1 2FOBGB2 2FPWGB1 2FPWGBK 2FRGPL1 2FTBAL1 2FTBCZ1 2FTBGR1 2FTBHR1 2FTBME1 2FTBMK1 2FTBPL1 2FTIIT1 2FTIIT3 2FTMCV1 2FTNRS1 2FVDMK1 2FVIHI1 2FVVBG1 2FWNIT3 2KALAP1 2KALGB1 2KALHR1 2KALIE1 2KALIT1 2KALPL1 2KAMMA1 2KKPNL1 2KTBGR1 2KTBHR1 2KTBMK1 2KTBPL1 2KTIIT1 2LALAP1 2LALGB1 2LALHR1 2LALIE1 2LALIT1 2LALPL1 2LAMMA1 2LKPNL1 2LTBGR1 2LTBHR1 2LTBMK1 2LTIIT1 2MALAP1 2MALGB1 2MALIE1 2MALIT1 2MALPL1 2MAMMA1 2MKPNL1 2MPWGB1 2MTBHR1 2MTBMK1 2MTIIT1 2NALAP1 2NALGB1 2NALIB1 2NALIE1 2NALIT1 2NALMA1 2NALPL1 2NAMMA1 2NKPNL1 2NTBHR1 2NTBMK1 2NTBPL1 2NTIIT1 2aalPL1 2aalpl1 2argpl1 2atbpl1 2balpl1 2crgpl1 2drgpl1

You can find your phone Provider Id in logs during connection or 'get info' operation.
Example: 5045X-2AALAP1
Also you can find the CU under the battery above imei numbers.

  • Flash firmware process erases FRP and USERDATA partitions. All user data will be lost. Please save all important data from the phones internal memory to safe place before doing flash firmware.
  • You can flash firmware for different providers but this can lead to bricking your phone. You can always return to the original firmware.

To flash firmware on the handset do the following steps:

  1. Download firmware from download area
  2. Connect to the phone
  3. Click on the ... button under the Flash tag
  4. Select *.sbf file in the firmware folder
    5. If you have a scatter firmware, change extention filter in the Open Firmware Dialog to "*sca" and select scatter file. We dont provide firmware in scatter format but you can find it in the internet.
  5. Click on the 'Firmware' button in the 'Flash' section
  6. Wait untill firmware download process finishes
  7. Disconnect the phone
  8. Switch on the phone and wait until it bootes. The boot process after firmware download can last up to 40 minutes. Please be patient


Repair Imei

  • This operation is paid. It costs 10 credits.
  • The operation of changing imei changes all imei numbers at once. Please be careful.
  • Flashing new firmware restores the original imei.
  • You dont need to root the handset or flash twrp or other recoveries. EasyBox Mtk doesnt need root or other things to change imei numbers. It works directly with handset flash device.
  • Internet connection is required to perform imei changing operation.
  • EasyBox Mtk prints the original imei numbers, than new imei numbers if they were already changed.
  • If you need to restore the original imei, you need to flash firmware. It will automatically restore default imeis
You can check imei numbers by typing *#06# in the dialing window of the handset.

To change imei numbers do the following steps

  1. Connect to the phone
  2. Change all imei numbers to the values you want at the right bottom side of the window
  3. Press "Repair IMEI" button
  4. Wait until 'IMEI successfully repaired' appears in the log
  5. Disconnect the phone
  6. Switch on the handset and check new imei numbers.


Factory Reset

To make factory reset do the following steps

  1. Connect to the phone
  2. Press 'Factory reset' button
  3. Disconnect the phone
  4. Switch on the handest and wait until initializing process is finished


Reset FRP

To reset FRP do the following steps
  1. Connect to the phone
  2. Press 'Reset frp' button
  3. Wait until 'FRP Resetting complete' appears in the log
  4. Disconnect the phone


Dump security

Dump security operation is helpful when you want to backup security data before unlocking the phone

To dump security area do the following steps
  1. Connect to the phone
  2. Press 'Dump security' button and select the name for the file to save
  3. Wait until 'Dump security success' appears in the log
  4. Disconnect the phone


Flash security

Flash security operation can be helpful when you want to restore simlock of the unlocked handset

To flash security area do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with security backup
  4. Press "Security" button in the 'Flash' section
  5. Wait until 'Flashing security success' appears in the log
  6. Disconnect the phone


Repair provider id

You need to repair provider id if you reflash the handset to the firmware of the relevant model. For example 5060D to 5060K

Before changing any data in the handset flash memory, EasyBox Mtk dumps all product info partition into the file in the 'backups' folder. You always can restore provider id by flashing this backup file back to the handset.

To repair provider id do the following steps

  1. Connect to the phone
  2. Change probider id value to the value you want at the right bottom side of the window
  3. Press "Repair Provider id" button
  4. Wait until 'IMEI successfully repaired' appears in the log
  5. Disconnect the phone


Flash product info

You can flash product info back to restore original Provider Id

To flash product info do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with product info backup
  4. Press "Product info" button in the 'Flash' section
  5. Wait until 'Flashing product info success' appears in the log
  6. Disconnect the phone