Admin

Alcatel PIXI 4 (5) LTE 5045A

5045A


Supported operations


Drivers


Connection

  • All drivers should be installed before connection.
  • You dont need to perform connect and disconnect operation every time you make an operation with handset. Connection should be done once before doing any operations with handset. After all operations with hansdset are complete, disconnect.
  • The phone battery should be charged on 40 percent or more before performing any operation on it! In case battery uncharges during work process, the phone wont switch on and charge battery. In this case you will have to take out the battery from the phone and charge it with external charger.
  • Use usb ports placed on the backside of PC to connect to the phone
  • Do not connect or disconnect other USB cables into the PC during performing operation with the phone
  • Dont use USB HUBs, long or very thin USB cables.
  • In case 'Read flash failed' or 'Write flash failed' error appears in the log, try to change the PC or reinstall drivers

Connection Cable: micro usb

To connect to the handset do the following steps:

  1. Go to 'direct services' Tab
  2. Choose your handset model in the combobox at the upper left side of the window
  3. Disconnect the handset from the cable.
  4. Remove battery from the handset.
  5. Push Connect button in the application form
  6. Insert battery and connect cable to the phone. The battery should be charged
  7. You should see the 'Phone found. Sending loader' strings in the Log
    8. If the handset began to load(you see the 'Alcatel' logo), the connection with handset failed! Click on 'Cancel', disconnect the pnone, switch it on, than switch it off and repeat 'Connection' procedure once more. If it doesnt help, try relaunching EasyBox Mtk application, install drivers or charge phones battery.

To disconnect the handset do the following steps:

  1. Click on 'Disconnect' button
  2. Disconnect the cable from the handset.
Never unplug cable until ongoing operations are finished. This can lead to bricking your phone.


Get Info

If you need to print the information about connected phone once more, you can click on Get Info button. This operation is read only and doesnt change anything inside of the phone.
The following information is printed:
  • Imei numbers
  • Provider Id
  • Simlock information
  • Frp information
  • Firmware version
  • Android version
  • Firmware compilation date time


Unlock

Before changing any data in the handset flash memory, EasyBox Mtk dumps all security partitions into the file in the 'backups' folder. You always can restore lock data by flashing the security backup file back to the handset.

To unlock the handset do the following steps:

  1. Connect to the phone
  2. Click on the Unlock button
  3. Wait until 'Phone successfully unlocked' appears in the log
  4. Disconnect the phone


Flash firmware

Supported provider ids

2A5CBS1 2AAEUY1 2AAVCO3 2AAVCR1 2AAVDO3 2AAVEC3 2AAVHN1 2AC9JMD 2AC9PC1 2AC9SVD 2ACIJM1 2AOFMX1 2ARGDO1 2ATGMX3 2ATIVE1 2ATLCO1 2B5CBS1 2BAEUY1 2BAVCO3 2BAVCR1 2BAVDO3 2BAVEC3 2BAVHN1 2BC9JMD 2BC9PC1 2BCIJM1 2BOFMX1 2BRGDO1 2BTGMX3 2BTIVE1 2BTLCO1 2CAEUY1 2CAVCO3 2CAVCR1 2CAVDO3 2CAVHN1 2CC9JMD 2CC9PC1 2CCIJM1 2COFMX1 2CRGDO1 2CTGMX3 2CTIVE1 2CTLCO1 2CTLCO1-1 2DAEUY1 2DAVCO3 2DAVCR1 2DAVDO3 2DAVHN1 2DC9JMD 2DC9PC1 2DCIJM1 2DOFMX1 2DRGDO1 2DTGMX3 2DTIVE1 2DTLCO1 2EAEUY1 2EAVCO3 2EAVCR1 2EAVDO3 2EAVHN1 2EC9PC1 2ECIJM1 2EOFMX1 2ERGDO1 2ETGMX3 2ETIVE1 2ETLCO1 2GAEUY1 2GAVCO3 2GAVCR1 2GAVDO3 2GAVHN1 2GC9PC1 2GCIJM1 2GOFMX1 2GRGDO1 2GTGMX3 2GTIVE1 2GTLCO1 2HAEUY1 2HAVCR1 2HAVDO3 2HAVHN1 2HC9PC1 2HCIJM1 2HOFMX1 2HRGDO1 2HTGMX3 2HTIVE1 2HTLCO1 2JAEUY1 2JAVCO3 2JAVCR1 2JAVDO3 2JAVHN1 2JC9PC1 2JCIJM1 2JOFMX1 2JTGMX3 2K5CBS1 2KAEUY1 2KAVCR1 2KAVDO3 2KAVHN1 2KC9PC1 2KCIJM1 2KOFMX1 2KRGDO1 2KTGMX3 2KTIVE1 2KTLCO1

You can find your phone Provider Id in logs during connection or 'get info' operation.
Example: 5045A-2A5CBS1
Also you can find the CU under the battery above imei numbers.

  • Flash firmware process erases FRP and USERDATA partitions. All user data will be lost. Please save all important data from the phones internal memory to safe place before doing flash firmware.
  • You can flash firmware for different providers but this can lead to bricking your phone. You can always return to the original firmware.

To flash firmware on the handset do the following steps:

  1. Download firmware from download area
  2. Connect to the phone
  3. Click on the ... button under the Flash tag
  4. Select *.sbf file in the firmware folder
    5. If you have a scatter firmware, change extention filter in the Open Firmware Dialog to "*sca" and select scatter file. We dont provide firmware in scatter format but you can find it in the internet.
  5. Click on the 'Firmware' button in the 'Flash' section
  6. Wait untill firmware download process finishes
  7. Disconnect the phone
  8. Switch on the phone and wait until it bootes. The boot process after firmware download can last up to 40 minutes. Please be patient


Repair Imei

  • This operation is paid. It costs 10 credits.
  • The operation of changing imei changes all imei numbers at once. Please be careful.
  • Flashing new firmware restores the original imei.
  • You dont need to root the handset or flash twrp or other recoveries. EasyBox Mtk doesnt need root or other things to change imei numbers. It works directly with handset flash device.
  • Internet connection is required to perform imei changing operation.
  • EasyBox Mtk prints the original imei numbers, than new imei numbers if they were already changed.
  • If you need to restore the original imei, you need to flash firmware. It will automatically restore default imeis
You can check imei numbers by typing *#06# in the dialing window of the handset.

To change imei numbers do the following steps

  1. Connect to the phone
  2. Change all imei numbers to the values you want at the right bottom side of the window
  3. Press "Repair IMEI" button
  4. Wait until 'IMEI successfully repaired' appears in the log
  5. Disconnect the phone
  6. Switch on the handset and check new imei numbers.


Factory Reset

To make factory reset do the following steps

  1. Connect to the phone
  2. Press 'Factory reset' button
  3. Disconnect the phone
  4. Switch on the handest and wait until initializing process is finished


Reset FRP

To reset FRP do the following steps
  1. Connect to the phone
  2. Press 'Reset frp' button
  3. Wait until 'FRP Resetting complete' appears in the log
  4. Disconnect the phone


Dump security

Dump security operation is helpful when you want to backup security data before unlocking the phone

To dump security area do the following steps
  1. Connect to the phone
  2. Press 'Dump security' button and select the name for the file to save
  3. Wait until 'Dump security success' appears in the log
  4. Disconnect the phone


Flash security

Flash security operation can be helpful when you want to restore simlock of the unlocked handset

To flash security area do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with security backup
  4. Press "Security" button in the 'Flash' section
  5. Wait until 'Flashing security success' appears in the log
  6. Disconnect the phone


Repair provider id

You need to repair provider id if you reflash the handset to the firmware of the relevant model. For example 5060D to 5060K

Before changing any data in the handset flash memory, EasyBox Mtk dumps all product info partition into the file in the 'backups' folder. You always can restore provider id by flashing this backup file back to the handset.

To repair provider id do the following steps

  1. Connect to the phone
  2. Change probider id value to the value you want at the right bottom side of the window
  3. Press "Repair Provider id" button
  4. Wait until 'IMEI successfully repaired' appears in the log
  5. Disconnect the phone


Flash product info

You can flash product info back to restore original Provider Id

To flash product info do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with product info backup
  4. Press "Product info" button in the 'Flash' section
  5. Wait until 'Flashing product info success' appears in the log
  6. Disconnect the phone