Admin

Alcatel PIXI 4 (5) 3G 5010X

5010X


Supported operations


Drivers


Connection

  • All drivers should be installed before connection.
  • You dont need to perform connect and disconnect operation every time you make an operation with handset. Connection should be done once before doing any operations with handset. After all operations with hansdset are complete, disconnect.
  • The phone battery should be charged on 40 percent or more before performing any operation on it! In case battery uncharges during work process, the phone wont switch on and charge battery. In this case you will have to take out the battery from the phone and charge it with external charger.
  • Use usb ports placed on the backside of PC to connect to the phone
  • Do not connect or disconnect other USB cables into the PC during performing operation with the phone
  • Dont use USB HUBs, long or very thin USB cables.
  • In case 'Read flash failed' or 'Write flash failed' error appears in the log, try to change the PC or reinstall drivers

Connection Cable: micro usb

To connect to the handset do the following steps:

  1. Go to 'direct services' Tab
  2. Choose your handset model in the combobox at the upper left side of the window
  3. Disconnect the handset from the cable.
  4. Remove battery from the handset.
  5. Push Connect button in the application form
  6. Insert battery and connect cable to the phone. The battery should be charged
  7. You should see the 'Phone found. Sending loader' strings in the Log
    8. If the handset began to load(you see the 'Alcatel' logo), the connection with handset failed! Click on 'Cancel', disconnect the pnone, switch it on, than switch it off and repeat 'Connection' procedure once more. If it doesnt help, try relaunching EasyBox Mtk application, install drivers or charge phones battery.

To disconnect the handset do the following steps:

  1. Click on 'Disconnect' button
  2. Disconnect the cable from the handset.
Never unplug cable until ongoing operations are finished. This can lead to bricking your phone.


Get Info

If you need to print the information about connected phone once more, you can click on Get Info button. This operation is read only and doesnt change anything inside of the phone.
The following information is printed:
  • Imei numbers
  • Provider Id
  • Simlock information
  • Frp information
  • Firmware version
  • Android version
  • Firmware compilation date time


Unlock

Before changing any data in the handset flash memory, EasyBox Mtk dumps all security partitions into the file in the 'backups' folder. You always can restore lock data by flashing the security backup file back to the handset.

To unlock the handset do the following steps:

  1. Connect to the phone
  2. Click on the Unlock button
  3. Wait until 'Phone successfully unlocked' appears in the log
  4. Disconnect the phone


Flash firmware

Supported provider ids

2A2DNZ1 2AALAP1 2AALAP1-6 2AALCZ1 2AALCZ1-1 2AALGB1 2AALGB1-1 2AALGB1-2 2AALGB1-3 2AALHU1 2AALHU1-2 2AALIB1 2AALIB1-P 2AALKK1 2AALRO1 2ABHBA1 2AC9PC1 2ARGRO1 2AS7BA1 2AS7RS1 2ATBGR1 2ATBHU1 2ATMCV1 2ATMST1 2ATNHU1 2ATNHU1-1 2ATNHU1-BS60 2ATWIE1 2ATWIE1-1 2AVDMK1 2AVDRO1 2AVDRO1-1 2AVDRO1-2 2AVDZA1 2AVDZA1-2 2AVIHI1 2AVNHR1 2AVRGB1 2AVRGB1-1 2B2DNZ1 2BALAP1 2BALCZ1 2BALCZ1-1 2BALGB1 2BALGB1-1 2BALGB1-2 2BALHU1 2BALHU1-2 2BALHU1-B 2BALIB1 2BALRO1 2BBHBA1 2BC9PC1 2BRGRO1 2BS7BA1 2BS7RS1 2BS7RS1-1 2BTBGR1 2BTBGR1-S40 2BTBHU1 2BTMCV1 2BTMST1 2BTNHU1 2BTWIE1 2BVDMK1 2BVDRO1 2BVDZA1 2BVDZA1-S50 2BVIHI1 2BVNHR1 2BVNHR1-2 2BVRGB1 2C2DNZ1 2CALAP1 2CALCZ1 2CALCZ1-1 2CALCZ1-1P 2CALGB1 2CALGB1-1 2CALGB1-P 2CALHU1 2CALHU1-1P 2CALIB1 2CALRO1 2CBHBA1 2CC9PC1 2CRGRO1 2CS7BA1 2CS7RS1 2CTBGR1 2CTBHU1 2CTMCV1 2CTMST1 2CTNHU1 2CTNHU1-1 2CTWIE1 2CVDMK1 2CVDRO1 2CVDRO1-P 2CVDZA1 2CVDZA1-P 2CVIHI1 2CVNHR1 2CVRGB1 2D2DNZ1 2DALAP1 2DALCZ1 2DALCZ1-1 2DALGB1 2DALHU1 2DALIB1 2DALRO1 2DBHBA1 2DC9PC1 2DRGRO1 2DS7BA1 2DS7RS1 2DTBGR1 2DTBHU1 2DTBHU1-2 2DTMCV1 2DTMST1 2DTNHU1 2DTWIE1 2DVDMK1 2DVDRO1 2DVDZA1 2DVIHI1 2DVNHR1 2DVRGB1 2F2DNZ1 2FALAP1 2FALCZ1 2FALGB1 2FALHU1 2FALIB1 2FALRO1 2FBHBA1 2FC9PC1 2FRGRO1 2FS7BA1 2FS7RS1 2FTBGR1 2FTBHU1 2FTMCV1 2FTMST1 2FTNHU1 2FTWIE1 2FVDMK1 2FVDRO1 2FVDZA1 2FVIHI1 2FVNHR1 2FVRGB1 2G2DNZ1 2GALAP1 2GALCZ1 2GALGB1 2GALHU1 2GALIB1 2GALRO1 2GBHBA1 2GC9PC1 2GRGRO1 2GRGRO1-M 2GS7RS1 2GTBGR1 2GTBHU1 2GTMCV1 2GTMST1 2GTNHU1 2GTWIE1 2GVDMK1 2GVDRO1 2GVDZA1 2GVIHI1 2GVNHR1 2GVRGB1 2H2DNZ1 2HALAP1 2HALCZ1 2HALGB1 2HALHU1 2HALHU1-2 2HALIB1 2HALRO1 2HBHBA1 2HC9PC1 2HRGRO1 2HS7RS1 2HTBGR1 2HTBHU1 2HTMCV1 2HTMST1 2HTNHU1 2HTWIE1 2HVDMK1 2HVDRO1 2HVDZA1 2HVIHI1 2HVNHR1 2HVRGB1 2J2DNZ1 2JALAP1 2JALCZ1 2JALGB1 2JALHU1 2JALIB1 2JALRO1 2JBHBA1 2JC9PC1 2JRGRO1 2JRGRO1-M 2JS7RS1 2JTBGR1 2JTBHU1 2JTMCV1 2JTNHU1 2JTWIE1 2JTWIE1-1 2JVDMK1 2JVIHI1 2TALAP1 2TALGB1 2TALRO1 2TRGRO1 2TTBHU1 2UALAP1 2UALGB1 2UALRO1 2URGRO1 2UTBHU1 2VALAP1 2VALGB1 2VALIB1 2VALRO1 2VRGRO1 2VTBHU1

You can find your phone Provider Id in logs during connection or 'get info' operation.
Example: 5010X-2A2DNZ1
Also you can find the CU under the battery above imei numbers.

  • Flash firmware process erases FRP and USERDATA partitions. All user data will be lost. Please save all important data from the phones internal memory to safe place before doing flash firmware.
  • You can flash firmware for different providers but this can lead to bricking your phone. You can always return to the original firmware.

To flash firmware on the handset do the following steps:

  1. Download firmware from download area
  2. Connect to the phone
  3. Click on the ... button under the Flash tag
  4. Select *.sbf file in the firmware folder
    5. If you have a scatter firmware, change extention filter in the Open Firmware Dialog to "*sca" and select scatter file. We dont provide firmware in scatter format but you can find it in the internet.
  5. Click on the 'Firmware' button in the 'Flash' section
  6. Wait untill firmware download process finishes
  7. Disconnect the phone
  8. Switch on the phone and wait until it bootes. The boot process after firmware download can last up to 40 minutes. Please be patient


Repair Imei

  • This operation is paid. It costs 10 credits.
  • The operation of changing imei changes all imei numbers at once. Please be careful.
  • Flashing new firmware restores the original imei.
  • You dont need to root the handset or flash twrp or other recoveries. EasyBox Mtk doesnt need root or other things to change imei numbers. It works directly with handset flash device.
  • Internet connection is required to perform imei changing operation.
  • EasyBox Mtk prints the original imei numbers, than new imei numbers if they were already changed.
  • If you need to restore the original imei, you need to flash firmware. It will automatically restore default imeis
You can check imei numbers by typing *#06# in the dialing window of the handset.

To change imei numbers do the following steps

  1. Connect to the phone
  2. Change all imei numbers to the values you want at the right bottom side of the window
  3. Press "Repair IMEI" button
  4. Wait until 'IMEI successfully repaired' appears in the log
  5. Disconnect the phone
  6. Switch on the handset and check new imei numbers.


Factory Reset

To make factory reset do the following steps

  1. Connect to the phone
  2. Press 'Factory reset' button
  3. Disconnect the phone
  4. Switch on the handest and wait until initializing process is finished


Reset FRP

To reset FRP do the following steps
  1. Connect to the phone
  2. Press 'Reset frp' button
  3. Wait until 'FRP Resetting complete' appears in the log
  4. Disconnect the phone


Dump security

Dump security operation is helpful when you want to backup security data before unlocking the phone

To dump security area do the following steps
  1. Connect to the phone
  2. Press 'Dump security' button and select the name for the file to save
  3. Wait until 'Dump security success' appears in the log
  4. Disconnect the phone


Flash security

Flash security operation can be helpful when you want to restore simlock of the unlocked handset

To flash security area do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with security backup
  4. Press "Security" button in the 'Flash' section
  5. Wait until 'Flashing security success' appears in the log
  6. Disconnect the phone


Repair provider id

You need to repair provider id if you reflash the handset to the firmware of the relevant model. For example 5060D to 5060K

Before changing any data in the handset flash memory, EasyBox Mtk dumps all product info partition into the file in the 'backups' folder. You always can restore provider id by flashing this backup file back to the handset.

To repair provider id do the following steps

  1. Connect to the phone
  2. Change probider id value to the value you want at the right bottom side of the window
  3. Press "Repair Provider id" button
  4. Wait until 'IMEI successfully repaired' appears in the log
  5. Disconnect the phone


Flash product info

You can flash product info back to restore original Provider Id

To flash product info do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with product info backup
  4. Press "Product info" button in the 'Flash' section
  5. Wait until 'Flashing product info success' appears in the log
  6. Disconnect the phone