Admin

Alcatel POP D3 4035D

4035D


Supported operations


Drivers


Connection

  • All drivers should be installed before connection.
  • You dont need to perform connect and disconnect operation every time you make an operation with handset. Connection should be done once before doing any operations with handset. After all operations with hansdset are complete, disconnect.
  • The phone battery should be charged on 40 percent or more before performing any operation on it! In case battery uncharges during work process, the phone wont switch on and charge battery. In this case you will have to take out the battery from the phone and charge it with external charger.
  • Use usb ports placed on the backside of PC to connect to the phone
  • Do not connect or disconnect other USB cables into the PC during performing operation with the phone
  • Dont use USB HUBs, long or very thin USB cables.
  • In case 'Read flash failed' or 'Write flash failed' error appears in the log, try to change the PC or reinstall drivers

Connection Cable: micro usb

To connect to the handset do the following steps:

  1. Go to 'direct services' Tab
  2. Choose your handset model in the combobox at the upper left side of the window
  3. Disconnect the handset from the cable.
  4. Remove battery from the handset.
  5. Push Connect button in the application form
  6. Insert battery and connect cable to the phone. The battery should be charged
  7. You should see the 'Phone found. Sending loader' strings in the Log
    8. If the handset began to load(you see the 'Alcatel' logo), the connection with handset failed! Click on 'Cancel', disconnect the pnone, switch it on, than switch it off and repeat 'Connection' procedure once more. If it doesnt help, try relaunching EasyBox Mtk application, install drivers or charge phones battery.

To disconnect the handset do the following steps:

  1. Click on 'Disconnect' button
  2. Disconnect the cable from the handset.
Never unplug cable until ongoing operations are finished. This can lead to bricking your phone.


Get Info

If you need to print the information about connected phone once more, you can click on Get Info button. This operation is read only and doesnt change anything inside of the phone.
The following information is printed:
  • Imei numbers
  • Provider Id
  • Simlock information
  • Frp information
  • Firmware version
  • Android version
  • Firmware compilation date time


Unlock

Before changing any data in the handset flash memory, EasyBox Mtk dumps all security partitions into the file in the 'backups' folder. You always can restore lock data by flashing the security backup file back to the handset.

To unlock the handset do the following steps:

  1. Connect to the phone
  2. Click on the Unlock button
  3. Wait until 'Phone successfully unlocked' appears in the log
  4. Disconnect the phone


Flash firmware

Supported provider ids

2AALAE1 2AALAP1 2AALAP1-6 2AALAT1 2AALAZ1 2AALAZ1-1 2AALBD1 2AALBD1-1 2AALBE1 2AALBW1 2AALCZ1 2AALCZ1-1 2AALDE1 2AALDE1-5 2AALDZ1 2AALDe1 2AALEG1 2AALGR1 2AALGR1-3 2AALGR1-P 2AALGR1-S40 2AALHU1 2AALHU1-2 2AALIB1 2AALIB1-P 2AALIN2 2AALIR1 2AALIT1 2AALIT1-S40 2AALMY1 2AALMZ1 2AALNA1 2AALNL1 2AALNP1 2AALRS1 2AALRU1 2AALRU1-1 2AALRU1-1B1 2AALRU1-2 2AALTN1 2AALZA1 2AALZM1 2AIJIN3 2AMVSN3 2ARGAM1 2AS7RS1 2BALAE1 2BALAP1 2BALAT1 2BALAZ1 2BALAZ1-1 2BALBD1 2BALBD1-1 2BALBE1 2BALBW1 2BALCZ1 2BALCZ1-1 2BALDE1 2BALDE1-E 2BALDZ1 2BALEG1 2BALGR1 2BALGR1-3 2BALGR1-S40 2BALHU1 2BALHU1-2 2BALHU1-B 2BALIB1 2BALIN2 2BALIR1 2BALIT1 2BALIT1-S40 2BALMY1 2BALMZ1 2BALNA1 2BALNL1 2BALNP1 2BALRS1 2BALRU1 2BALRU1-1 2BALRU1-2 2BALTN1 2BALZA1 2BALZM1 2BIJIN3 2BMVSN3 2BRGAM1 2BS7RS1 2BS7RS1-1 2CALAE1 2CALAP1 2CALAT1 2CALAT1-1 2CALAZ1 2CALAZ1-1 2CALBD1 2CALBE1 2CALBW1 2CALCZ1 2CALCZ1-1 2CALCZ1-1P 2CALDE1 2CALDE1-1P 2CALDE1-S40 2CALDZ1 2CALEG1 2CALGR1 2CALHU1 2CALHU1-1P 2CALIB1 2CALIN2 2CALIR1 2CALIT1 2CALIT1-P 2CALIT1-S40 2CALMY1 2CALNA1 2CALNL1 2CALNP1 2CALRS1 2CALRU1 2CALRU1-1 2CALRU1-2 2CALRU1-S40 2CALTN1 2CALZA1 2CALZM1 2CIJIN3 2CMVSN3 2CRGAM1 2CS7RS1 2DALAE1 2DALAP1 2DALAT1 2DALAZ1 2DALAZ1-1 2DALBD1 2DALBE1 2DALBW1 2DALCZ1 2DALCZ1-1 2DALDE1 2DALDZ1 2DALEG1 2DALGR1 2DALHU1 2DALIB1 2DALIN2 2DALIR1 2DALIT1 2DALIT1-S40 2DALMY1 2DALMZ1 2DALNA1 2DALNL1 2DALNP1 2DALRS1 2DALRU1 2DALRU1-1 2DALTN1 2DALZA1 2DALZM1 2DIJIN3 2DMVSN3 2DRGAM1 2DS7RS1 2EALAE1 2EALAP1 2EALAT1 2EALAZ1 2EALAZ1-1 2EALBD1 2EALBE1 2EALBW1 2EALCZ1 2EALDE1 2EALDZ1 2EALEG1 2EALGR1 2EALHU1 2EALIB1 2EALIN2 2EALIR1 2EALIT1 2EALMY1 2EALMZ1 2EALNA1 2EALNL1 2EALNP1 2EALRS1 2EALRU1 2EALRU1-1 2EALRU1-2 2EALTN1 2EALZA1 2EALZM1 2EIJIN3 2ERGAM1 2ES7RS1 2FALAE1 2FALAP1 2FALAT1 2FALAZ1 2FALAZ1-1 2FALBD1 2FALBE1 2FALBW1 2FALCZ1 2FALDE1 2FALDZ1 2FALEG1 2FALGR1 2FALHU1 2FALIB1 2FALIN2 2FALIR1 2FALIT1 2FALIT1-S50 2FALMY1 2FALMZ1 2FALNA1 2FALNL1 2FALRS1 2FALRU1 2FALRU1-1 2FALTN1 2FALZA1 2FALZM1 2FIJIN3 2FRGAM1 2FS7RS1 2GALAE1 2GALAP1 2GALAT1 2GALAZ1 2GALAZ1-1 2GALBD1 2GALBE1 2GALBW1 2GALCZ1 2GALDE1 2GALDZ1 2GALEG1 2GALGR1 2GALHU1 2GALIB1 2GALIR1 2GALIT1 2GALMZ1 2GALNL1 2GALRS1 2GALRU1 2GALTN1 2GALZA1 2GALZM1 2GIJIN3 2GRGAM1 2GS7RS1 2HALAE1 2HALAP1 2HALAT1 2HALAZ1 2HALBD1 2HALBE1 2HALCZ1 2HALDE1 2HALDZ1 2HALEG1 2HALGR1 2HALHU1 2HALHU1-2 2HALIB1 2HALIR1 2HALIT1 2HALIT1-S40 2HALMZ1 2HALNL1 2HALRS1 2HALRU1 2HALTN1 2HALZA1 2HALZM1 2HIJIN3 2HRGAM1 2HS7RS1 2JALAE1 2JALAP1 2JALAT1 2JALAZ1 2JALAZ1-1 2JALBD1 2JALBE1 2JALCZ1 2JALDE1 2JALDZ1 2JALEG1 2JALGR1 2JALHU1 2JALIB1 2JALIR1 2JALIT1 2JALNL1 2JALRS1 2JALRU1 2JALTN1 2JALZA1 2JALZM1 2JIJIN3 2JRGAM1 2JS7RS1 2ZALAP1 2ZALAT1 2ZALBE1 2ZALCZ1 2ZALDE1 2ZALDE1-1 2ZALDZ1 2ZALGR1 2ZALHU1 2ZALHU1-2 2ZALIB1 2ZALIR1 2ZALMY1 2ZALNL1 2ZALRU1 2ZS7RS1 2dalgr1

You can find your phone Provider Id in logs during connection or 'get info' operation.
Example: 4035D-2AALAE1
Also you can find the CU under the battery above imei numbers.

  • Flash firmware process erases FRP and USERDATA partitions. All user data will be lost. Please save all important data from the phones internal memory to safe place before doing flash firmware.
  • You can flash firmware for different providers but this can lead to bricking your phone. You can always return to the original firmware.

To flash firmware on the handset do the following steps:

  1. Download firmware from download area
  2. Connect to the phone
  3. Click on the ... button under the Flash tag
  4. Select *.sbf file in the firmware folder
    5. If you have a scatter firmware, change extention filter in the Open Firmware Dialog to "*sca" and select scatter file. We dont provide firmware in scatter format but you can find it in the internet.
  5. Click on the 'Firmware' button in the 'Flash' section
  6. Wait untill firmware download process finishes
  7. Disconnect the phone
  8. Switch on the phone and wait until it bootes. The boot process after firmware download can last up to 40 minutes. Please be patient


Repair Imei

  • This operation is paid. It costs 10 credits.
  • The operation of changing imei changes all imei numbers at once. Please be careful.
  • Flashing new firmware restores the original imei.
  • You dont need to root the handset or flash twrp or other recoveries. EasyBox Mtk doesnt need root or other things to change imei numbers. It works directly with handset flash device.
  • Internet connection is required to perform imei changing operation.
  • EasyBox Mtk prints the original imei numbers, than new imei numbers if they were already changed.
  • If you need to restore the original imei, you need to flash firmware. It will automatically restore default imeis
You can check imei numbers by typing *#06# in the dialing window of the handset.

To change imei numbers do the following steps

  1. Connect to the phone
  2. Change all imei numbers to the values you want at the right bottom side of the window
  3. Press "Repair IMEI" button
  4. Wait until 'IMEI successfully repaired' appears in the log
  5. Disconnect the phone
  6. Switch on the handset and check new imei numbers.


Factory Reset

To make factory reset do the following steps

  1. Connect to the phone
  2. Press 'Factory reset' button
  3. Disconnect the phone
  4. Switch on the handest and wait until initializing process is finished


Reset FRP

To reset FRP do the following steps
  1. Connect to the phone
  2. Press 'Reset frp' button
  3. Wait until 'FRP Resetting complete' appears in the log
  4. Disconnect the phone


Dump security

Dump security operation is helpful when you want to backup security data before unlocking the phone

To dump security area do the following steps
  1. Connect to the phone
  2. Press 'Dump security' button and select the name for the file to save
  3. Wait until 'Dump security success' appears in the log
  4. Disconnect the phone


Flash security

Flash security operation can be helpful when you want to restore simlock of the unlocked handset

To flash security area do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with security backup
  4. Press "Security" button in the 'Flash' section
  5. Wait until 'Flashing security success' appears in the log
  6. Disconnect the phone


Repair provider id

You need to repair provider id if you reflash the handset to the firmware of the relevant model. For example 5060D to 5060K

Before changing any data in the handset flash memory, EasyBox Mtk dumps all product info partition into the file in the 'backups' folder. You always can restore provider id by flashing this backup file back to the handset.

To repair provider id do the following steps

  1. Connect to the phone
  2. Change probider id value to the value you want at the right bottom side of the window
  3. Press "Repair Provider id" button
  4. Wait until 'IMEI successfully repaired' appears in the log
  5. Disconnect the phone


Flash product info

You can flash product info back to restore original Provider Id

To flash product info do the following steps

  1. Connect to the phone
  2. Click on the ... button under the Flash tag
  3. Select *.sbf file with product info backup
  4. Press "Product info" button in the 'Flash' section
  5. Wait until 'Flashing product info success' appears in the log
  6. Disconnect the phone